Part 1,Technical parameters and specifications:
Model:PS001 2.0
Screening area:2 Square Meters
Hole dimension:2.2mm
Inlet pressure:0.1-0.25Mpa
Inlet consistency:1-1.5%
Capacity of screen:175T/D
Basket dimension: φ800*800*φ2.2
Size of the connecting pipe:
1>Pulp inlet mouth:DN300mm
2>Fine pulp mouth:DN300mm
3>Slag discharge mouth:DN150mm
4>Heavy slag mouth:DN100mm
5>Dilution water pipe mouth:DN100mm
6>Exhaust outlet:2in
Motor power:90KW-4
Sealing method:Use double acting assembling cooling water seal, sealed water pressure is 0.1 Mpa higher than the inlet pulp pressure, the flow rate is 3-8L/min
Drive type: narrow V triangle belt drive
Bearing design: Design of spherical roller bearing
Bearing lubrication: Lithium grease lubrication, with copper oil tube and connecting end cap.
Pressure test: diaphragm pressure gauge, measuring range 0-0.6 Mpa.
Net weight:3300 kg
Dimension:2350×1220×2285 mm(Length * width * height)
Part 2,Supply scope:
1 set Host,1set motor,2sets diaphragm pressure gauge, 1set triangle belts, 8 sets anchor bolts, 1 PC motor plate,1 PC big & 1 PC small pulley.
Part 3,Material:
Screen drum SS316,casing SS304, the parts which may connected with pulp is made by SS 304. Plate thickness δ=8mm,inner surface is polished and the outer surface is sandblasted. the base is welded by Q235 steel. Spindle 40 Cr quenching and tempering treatment.