Iron Based Amorphous C Type Core

1  Material

J1K101 iron based amorphous Ribbon from Henan Zhongyue Amorphous New Materials Corp. Ltd (120 mm, 140 mm,170 mm,213mm)

2  Size: Customised Size

3.  Suit to Flux Density: 

Single phase Transformer: 1.30~1.40 Tesla

Three phase Transformer: 1.25~1.35 Tesla

4. Material Density:7.18 g/cm^3

5.  Lamination Factor:  Not less than 86%

Amorphous Type	Core forOil immersed transformer		Core for dry Transformer
	30-80KVA	100KVA	A＜800mm	A≥800mm
142mm	86%	88%	88%	86%
170mm	86%	87%	87%	86%
213mm	86%	86%	86%	86%

6.  General Curve Relation between No-load AmOrphousCore Loss and Excitation Power

AmOrphousCore no-load loss curve

 

AmOrphousCore excitation power curve

 

Note

Single Core no-load loss and excitation power, according to the special needs of Customers to recommend the design and processing;

the no-load loss and excitation power of three - phase and three - column integral core should Be designed and calculated according to the core.

7.Characteristics

High Saturation magnetization-- reducing core volume

Rectangular Structure---- Easy to coil Assembly

Opening Core-------Good ability to DC Resistance and bias saturation

High Magnetic permeability

Low Coercive force

Low Core loss - reduce temperature rise (it is just sillicon steel 1/5-1/10)

Good Temperature stability-work long time in -55℃-150℃

Low Cost

8.Applications:

PV Inverters, solar inverters and wind power inverters

Middle and high frequency switch power supply transformer

Output Filter reactor in high frequency switch power supply

Various Inductor cores