| Classification: | Chemical Auxiliary Agent |
|---|---|
| Brand Name: | Runking |
| Usage: | Water Treatment Chemicals |
| Type: | Water Treatment Chemicals |
| CAS No.: | N/A |
| Classification: | Water Treatment Chemicals |
| Model Number: | A02001 |
| Place of Origin: | China (Mainland) |
| Purity: | N/A |
| EINECS No.: | N/A |
| MF: | N/A |
| Other Names: | N/A |
| Appearance: | Powder |
| Color: | White |
| PH: | <7.0 |
| Type: | Water based |
| Function: | Remove water scale |
| Additive amount: | 1:10-20 |
Quick Details
Specifications
Limescale remover
Featuresthe products composed with
Scale inhibitor, corrosion inhibitor, accelerator, masking agent, fog
Inhibitor, surfactant,
Organic acids. High speed cleaning, and little corrosion
On metal. this chemicalDoesn't contain toxic substance, the
Waste no pollution, safety andEnvironmental protection.
Item |
Index |
Appearance |
Powder |
Color |
Yellow |
Ph |
<7.0 |
Type |
Waterbased |
Using method
1. the rinsing process: water washing—acid Descaling—water washing—passivation;
2. Disconnect
the other system has nothing to do with the boiler; join the cleaning tank,
Cleaning pump with
the boiler connection into clean closed loop;
3.
Inspection
On cleaning system
Leakage situation under the Simulated cleaning state. At
the same time,
Remove loose dirt in the boiler,
When there are no large particles impurities exist, end the cleaning;
4. after the rinsing, adding the
Boiler cleaning agent into the Cleaning tank with circulation, control the concentration
8%-10%. Temperature range could be 50℃-60℃,Cleaning
Decontamination cycle within the system about 2-3 hours.
Timing with pH test paper measured the pH value of acid liquid ( 20 minutes
As a time) and keep it under 1, ending the
Pickling process after PH tends to
Be stable in half an hour, and there
Is no gas emission in the cleaning system.
5. Adding
the passivation pretreatment filming agent with circulation after rinsing
Qualified to improve the decay resistance
oF the boiler. When the temperature
of the whole system solution
Concentration up to 60 degree, then stop cycle,
soaking 2-3 hours, and discharge the passivation liquid out of the system, then ending
The cleaning process.
