General Composition: | Inhibitors |
---|---|
Specification: | 170KG |
Type: | cutting oil |
Application: | Industrial Lubricant |
Brand Name: | ICON |
Model Number: | LY-Y301 |
Place of Origin: | China (Mainland) |
Appearance: | red brown oil |
soluble in water: | yes |
appplication: | metal cutting machining for lubricant, antirust, cooling and cleaning |
Quick Details
Specifications
Water-soluble cutting oil
LY-Y301
LY-Y301 is one new type of water-soluble Cutting oil with biological stability. Its unprecedented unique compound Design, enables the water-soluble cutting oil to have good effect on capacity, Lubrication, cooling, cleaning, rust prevention and anti-microorganism ability and so on. It satisfies the technological requirements of high speed, high Accuracy, multi-purpose, high efficiency, the high flexible on the modernized Engine bed, the machining center, the automatic production line. It is suitable for all kinds of cutting and grinding work on ferrous metal, copper alloy and Aluminum alloy.
1. Characteristics
1.1 Non-toxic,
1.2 Good performance of E.P., Lubrication, cooling, cleaning.
1.3 with extremely good rust Prevention performance on the work piece and the equipment.
1.4 Solution pH value:
8.0~9.0
2. Usage method
Recommended Concentration:
Abrasive machining: 3%~5%
: 10%~15%
Cutting machining: 5%~8%
If enhancing the EP,
Certain concentration Emulsion, stir evenly. Emulsify the emulsion completely and then
it can be used.
Fluid, theand the greasy dirt, and clean the liquid storage tank and
Thoroughly with the circulating water. (If old fluid has been decayed, It is better to add
Disinfectant) clean Tank circularly with 0.5%~1% this diluent, finally prepare the work
solution and stir evenly.
Supply the new fluid: When the work solution needs to be supplied, during add water, also
Should Add the corresponding quantity original fluid in proportion to maintain the
enough density of the fluid.
the working fluid
Should maintain clean, ventilated, the machine tool should have the efficient
System of filtration and removing dregs, then removing impurities promptly such
as iron filings,and so on. If the machine
Tool does not start for a long time, should carry on the idle circulation and
the oxygenation regularly for the working fluid, detect working fluid density
and the pH value regularly, and supply or replace it with the new fluid at the
Right moment.
Seal It and store under the room temperature, store in dry, cool, the well Ventilated storehouse, keep from the sun-scorched and rain-drenched in the Storage and transportation. We suggest that the storing temperature is not Higher than 40℃.