1.Polymer Insulator Character:

1.1high mechanical strength;

1.2Good performance of hydrophobicity and anti-pollution;

1.3 Excellent electrical Performance;

1.4 Small volume and light weight.

2.TID polymer Insulator Character:

2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle.

2.2 We use HTV silicone rubber which hydrophobicity can reach to HC1 level and thickness of the housing is more than 3mm.

2.3 We use ECR rod as the core which is high acid resistant.

2.4 We use hot dip Galvanizing steel fitting,the thickness of the zinc more than 86μm.

2.5 We adopt the advance fitting crimping producing technology.

2.6 We adopt the unique notch design of the sealing of metal fitting, all the notch thickness keep the same which avoid the sharp end discharge.

2.7 We use HTV instead of the RTV seal the interface between the fitting and rod.

 

3.Main Parameter:

No.	Part No.	Rated Voltage	Tensile Load	Section Length	Creepage distance	Power Frequency Withstand Voltage		Lighting Impulse Withstand Voltage	Applied Standard
						Dry	Wet	Pos..
1	FXB-15/70	15	70	343	365	90	65	140	ANSIC29
2	FXB-28/70	24	70	445	550	130	100	190
3	FXB-3570	33	70	541	730	145	130	250
4	FXB-46/70	46	70	590	900	180	145	280
5	FXB-69/70	69	70	750	190	220	185	360

 1.Polymer Insulator Character:
1.1high mechanical strength;
1.2Good performance of hydrophobicity and anti-pollution;
1.3 Excellent electrical Performance;
1.4 Small volume and light weight.
2.TID polymer Insulator Character:
2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt