the following example is for you reference.


1.Brief Introduction:

  

 

2.Techincal parameters:

  

Model	LYO-1	LYO-2	LYO-3	LYO-4	LYO-7	LYO-10	LYO-20	LYO-40
Shelf Usable Area	1	2	3	4	7	10	20	40
Cold Trap (℃)	<-70
Stopper	YES
(?22)	2100	4200	6300	8140	15750	19950	42900	52500
Liquid (L)	20	40	60	80	150	200	400	800
Cooling Water Qty.	3.2	4.2	4.5	9	16	18	20	50
Cleaning Water(L/min)	100	100	100	100	100	100	150	200
Pure Steam Consumption (Kg/H)	20	40	60	100	150	200	400	600
CIP	YES
SIP	Optiona
Shelf (mm)	100
Shelf Temperature Range	-55-+80
Condenser Capacity(Kg/24H)	20	40	60	80	150	200	400	800
Limiting Vacuum	<3Pa

 

3.Performance features:

U  Adopt the PLC and HMI

Use the 7 inch touch screen,User-friendly interface,easy to Understand, do not need instructions can also Operte.

U  Automatic Programmable Control System

from precfreeze to drying,user-friendly programmable Controls enable you to start runs quickly and the PID controler can control different Ramping and holding segments to meet different temperature protocols.

U  Pre-freeze System

Prefreeze so fast and  in place pre-freezes sample to save money and time,eliminating the need for a separate freezer and product transfer.

U  Defrosting System

Automatically defrosting system is available for cold tray When defrosting is necessary.

U  Vacuum Backfilling System

as far as the permanent preservation of the sample Desiccation is concerned it protects a sample by inserting sterile air and Nitrogen gas with back filling system for preventing contamination of the Sample.

U  Automatic drainage System

after the drainage and vacuum system interlocking,avoid forget the breakdown of the drain valve in order to produced  the Vacuum pump(optional).

U  Compressor Delayed Protection