the following example is for you reference.
Main Advantages:
1)More energy-saving and efficient.
2)Drying strength is large, because the material is highly dispersed in the air flow, the total surface area of the particles is extremely dry and effective area.
3)Processing capacity, high thermal efficiency, when the dry non-binding water, the thermal efficiency of up to 60%.
4)Drying time is short
5)Easy to install and Control.
Technical details:
1." Triple Level Drying Core?",Use rotary harrow and auto down and convection unique key patented technology.
2.Use " Rotary Harrow Rolling Triple Multi-Level Exhaust?" technique:while the machine working, the steam can be discharged at the same time for preventing the steam saturating and absorbed back by the dry material.
3.for getting a long distance and voyage retention and higher heat utilization rate, our machine features with a " W-S Type Rotary Harrow Triple Multi-Level? " moving way,letting the material make a full contact with the hot air,
4." Mechanical Material Guiding"Technology, the material can move forward or back under the guiding system.
5.Exclusive patented technology:Triple Pass Multi-level, the main structure is consists of three different metal steel cylinder with different diameter, it can get a bigger evaporation area, and drying faster.
6." Ad Hoc Hot Air dispensing System?",three level air flow can be regulated at will.
7." Auto-Feeding Control device" Can be regulated according to the moisture content of the material.
8." Main Machine Speed Governing" can be regulated as the customer's requirements.
9." downstream + Vortex + Alternating and Reciprocating Type Flow?" Patented technology, moving forward 3 steps and backward 2 steps, meanwhile, the dry material will move ahead, and the wet next, auto-discharging after meeting the requirements.
10." Low-Temperature Larger Air Flow"Drying technology, the wet material can get a larger and fast evaporation performance under a larger Low-Temperature and air flow.
11." Auto-Reciprocating Feeding Back "Technology.Based on this the wet and the dry material can get a fully mixture and rolling in the meantime,and separated into scattered condition.
12." Pros and Cons Material Spreading System",through pros and cons material system, the materials can make pros and cons rolling movements,forming many material falls in the drum,so all material can fully spreaded inside the drum which fully contact with the hot another words, there's no dead spots for the material inside the drum.
13." Negative pressure"Working condition, clean work site and operating reliably
Our Factory:
JN Drying Equipment R&D Co.,Ltd was Established in 1991Our company specializes in the development and production of drying equipment.We have our own unique design concept and the real energy saving process" Rotary harrow rolling triple level multi-loop",our company has passed the ISO 9001:2008 international quality management system certification.We can handle a variety of waste materials, especially high humidity and high viscosity materials such as high humid, viscous sludge and solid waste slag. We can also produce products according to customer requirements.
Certificates:
Our Service:
FAQ: