Dewater Air Knife

 

1.1  Summary

It is special equipment, developed for Plastic compounding and masterbatch processing industry, it is used to rapidly Remove water on the surface of the strand to guarantee material to reach ideal Final moisture content.

 

1.2  Working Principle

It adopts negative pressure air flow Produced by high pressure air blower to dreprive water of immersed strands, the Gas-liquid mixed air flow isolates liquid through efficient cyclone, liquid Discharges automatically after gathering in the sedimentation tank.

 

1.3  Characteristics

1. IT has super-strong suction, and dewatering efficiency is higher than the traditional one obviously, Dehydration ratio of water on surface is above 99%, moisture of nylon products Can be controlled less than 0.88%.

2. with wear resistant ceramic Suction head, the strands pass it with smal resistance, and easy to be cleaned; It is applied to high glass fiber reinforced products.

3. with the innovative guide Groove design and optimized air flow distribution, it has been applied to LFP Field successfully.

4.  with the innovative anti-back Flushing &anti-blocking design, it can guarantee that the outlet will not Be blocked by sludge for a long time.

5.  with the innovative multi-layer Paralleling eddy cyclone machine, it can realize high-efficiency gas-liquid Separation with no filter screen, less wind resistance & pressure loss, Maximum speed of suction head up to 25m/s and no blocking phenomenon.