Other paragraph 0436 lock electromagnet parameters are as follows:

A. Features:

1. the design of the elongated.

2. Line package not beyond the framework, to level off in the lock.

3. the outlet position gap, not to resist phenomenon into the lock.

Strength in the regular schedule 4. 5 mm, can achieve 260 gf.

5. Power electromagnet 40% larger than conventional lock.

 

2. the dimensions:

Frame length: 36.6 mm

14 mm wide framework:

High framework: 10 mm

Rod diameter: 4.5 mm

Rod diameter: 4 mm

3. Electrical parameters:

1. Voltage: spot DC24V, DC12V, DC6V 3 kinds.

2. Power: respectively are: 19.2 W and 24 W, 41 W 3 kinds.

3. Current: according to the selection of lock electromagnet for voltage size, power and size.

Current = power/voltage

4. Power parameters:

 

Power and lock the electromagnet for power, power, the greater the products relative to the greater the power, the smaller the power and strength.

1. 41 w, 5 mm stroke strength of 400 gf.

2. Power 24 w, 5 mm stroke strength of 260 gf.

3. the power of 19.2 W, 5 mm stroke strength of 190 gf.

5. Product temperature:

Lock electromagnet for temperature rise when using no more than 50 degrees Celsius.

Response time: six.

Make the action within 0.2 seconds after the power supply.

7. Product life:

Normal service life of up to 500000 times, if in the damp, high temperature environment, such as lock electromagnet for life can reach 500000 times.

Eight. Products using temperature:

in the high temperature of 120 degrees Celsius and - 30 degrees Celsius can be used in low temperature.

Nine. Market lock electromagnet for common problems and cause analysis:

1. the product to use after a period of time, dozen don't open the lock.Reason: lock electromagnet power is not enough.

2. Product to use after a period of time, tie rod can't action.Reason: the product skeleton material heat resistance is not good.

3. the product the occasional dozen don't open the lock.Reason: lock electromagnet force and the circuit connection is unreliable.