| Brand Name: | no |
|---|---|
| Voltage: | no |
| Measuring Range: | 0~9990ppm (mg/L) |
| Accuracy Class: | two FS |
| Display Type: | digital |
| Model Number: | TDS-2B |
| Place of Origin: | China (Mainland) |
| Calibration: | Factory Calibrated |
| Temperature Compensation: | Automatic |
| Operating Temperature: | zero to fifty |
| size: | 142X 25X15mm |
| weight: | 36g |
| color: | same as picture |
| packing: | 10 pieces per box |
Quick Details
Specifications
OPERATING INSTRUCTIONS
1.Remove the protective cap.
2.Press the on/off button once out of the water. the Tester will read " 000"
3. Immerse the tester into the water no more than 2 Inches.
4.Wait for the display to stabilize. the tester automatically Compensates for temperatures variations. Once the readout Stabilizes(10-30seconds), press the HOLD button to view out of the water.
5.Press the on/off button again to turn off the tester. the tester will shut off automatically after 10 minutes of non-use.
6.after usage, shake off the water from your tester or Wipe it with a tissue.
Note:If the tester displays a flashing" X10" icon, multiply the reading by 10.
Important:Do not drop the entire tester in the water or dip beyond the maximum 2" level. this product is not waterproof. Tester Is not meant to used in hot water.
Calibration:Your meter has been factory calibrated to324ppm,which is suitable for most applications. Re-calibration may be necessary from time-to time, depending On usage.
