Compatible Fukuda ultrasound probe FUT-CS602-5A

Compatible Machine: UF-4100
Parameter: C3.5-80R60S
Warranty: 12 months

Shipment & Delivery
Shipment: DHL/UPS/TNT/EMS/by SEA
Delivery Date: within 7 working days after receiving the payment

Working Environment:

Match Probe	Environment Temp	Reletive Humidity	Barometric Pressure
BW Ultrasound	0oC-40oC	30%-90%	700hpa-1000hpa
CDFI	0oC-40oC	30%-90%	700hpa-1000hpa

Main Products: 

Spo2 sensors, ecg cable, NIBP cuff, IBP cable, Temperature probe, Ultrasound probe, Toco transducer, etc.


Note:

1)Pls read the instruction manual before use.
2)Ultrasonic probe is precious device, pls take a great care not to clash the head in the using process. Pls carefully protect the head of probe during the transportation.
3)When install and remove the probe should shut down the machine main power supply first.
4)Should avoid contact with organic solvent, otherwise the probe will be damaged by contact with organic solvent cracking, it can use alcohol, but acetone wiped is not allowed.
5)Protect the lens surface. Once the lens surface damage, coupling agent is easy to piezoelectric the internal, so pls take care not to sharp the objects.
6)Pls use the Non-corrosive coupling agents, it will not stimulate the skin. and with the corrosive agents will damage the lens.
7)If you want to soak disinfection, please according to the manufacturer's manual operation, otherwise the probe internal circuit may ruin due to the water and even burn out. 
8)May not be high temperature sterilization, because the probe made of piezoelectric ceramics, high temperature will make the piezoelectric effect to weaker it, single crystal material probe as well.
9)Should be check carefully before use, the probe shell, cables to see if there is any breakage, in case the probe work under high voltage electric shock cuts.
10)after use, must keep the probe coupling agent wiped clean, in case of a mouse or other animals gnawing on the lens.