the machine size:
Capacity: 80L, 150L, 225L, 408L, 608L, 1000L
Internal dimensions WxHxD (cm) 40 × 50 × 40, 50 × 60 × 50 ,50 × 75 × 60, 60 × 85 × 80, 80 × 95 × 85
External dimensions WxHxD (cm) 90x136x94 100X146X104 100x161X117 110x171x137 130x181x137
Third, the temperature range:
-40 To 150 degrees can be set
Humidity range: 20% to 98% can be set

the rate of temperature rise:
1. normal temperature -----> 150 oC about 45 minutes (non-linear load, about 3.5 oC / min)
2. room temperature -----> - 20 oC for about 45 minutes (non-linear load, about 1.2 oC / min)

 the machine precision:
1. control accuracy (precision): Temperature: ± 0.5 oC
Humidity: ± 1% RH
2. Accuracy distribution (uniformity): Temperature: ± 1.0 oC
Humidity ± 2% RH
Sixth, the control system: touch screen Korea imported 900 temperature controller
Control: Touch
Showing: Korea TEMi880 programmable CLCD color LCD display.
System capacity: 120 group of programs X100 section, the required number of segments of each program can be arbitrarily divided, each set of programs and can be freely linked to each other.
Cycle setting: each running program executable, or 9999 back to the cycle repeated many times, and can be subdivided to the extent of 5 to perform additional blocking segment number of the part of the cycle.

Operating mode:
SETTINGS / Programs / Link, three operation modes in line with the implementation of a variety of temperature conditions of the test.
Control: Intelligent microcomputer PID + SSR / SCR forward and inverse two-way automatic synchronization output.

Data set:
built-in directory management program, to facilitate the test name and program data to create, modify, access or operation line.

Curve drawing: complete data set can be obtained immediately set the relevant data of the curve, it is also informed of the actual operation of the operating curve the drawing screen.

Timing controls:
2 groups of timing output control interface, with 10 kinds of time control mode, the drive assembly for external logic to perform the planned timing of start / stop it.

Reservation start:
all test conditions are able to set reservation function start running it.

Operation Lock:
You can lock the start-stop conditions, prevent other personnel inadvertently affect the results.

Power reset:
a power outage restart mode memory device and re-power station of the timing 1.BREAK (interrupt) 2.COLD (cold start) 3.HOT heat engine start).

Detecting security:
built-in system can detect the sensing device 15, in order to ensure safe operation of the machine, when the perception of abnormal fault immediately cut off the power to control the machine, and automatically displays the fault occurrence time, the project findings and Remedy .
Abnormal traced: to display the history data is abnormal Fault.
External protection: independent of the electronic over-temperature protection device of a controller.

Communication Interface:
RS-232 standard communication interface of the device with a personal computer (PC) at the same time online multi-machine control and management.
Switching display: Chinese / English subtitles display can be switched freely.
2. The protection device:
Air burning to prevent the two groups switch
Compressor pressure protection switch group 1
Compressor overheating protection switch group 1
Compressor overcurrent protection switch group 1
Ceramic E-16 Fast Fuse 2 groups
No fuse overload protection switch group 1
Line fuse and the whole sheath terminal
3. The reliability test system meets the specifications: CNS, ISO, JIS, ASTM, DIN, BS, IEC, NACE, UL, MIL .........

machinery sheet metal structure and material:
1. The appearance of high levels of texture, matte surface after processing lines, and embedded non-reactive handles, easy to operate, safe and reliable.
2. Within the box material: SUS304 # cold, heat-resistant stainless steel, mirror-treated.
3. Carton Material: outer paint
4. Insulation material: imported high-strength fire PU foam insulation, rigid polyurethane foam and glass fiber.
5. Anti-sweat parts: the energy system of the K-tube and thin film on the hotline as an anti-sweat treatment.
6. Test hole: ￠ 50mm hole on the left side of the body, a plug. (Line hole power lines and signal lines can be energized to do the test)
7. Door: Monolithic door left open, the handle to the right, two silicone foam rubber.
8. Product observation window: 350 × 250 × 40 mm three-layer vacuum, along with lighting Philips 11W
9. The sample rack placement: stainless steel SUS304 # 2 adjustable spacing glove track group, grill racks 2 (maximum can be placed 20 kilograms).
10. Attached wheels (for easy movement) and flat water cup angle (adjusted body balance).
11. This equipment can not be placed contain flammable or explosive materials produce volatile or corrosive gas

test storage Note:
The above indicators are under conditions where no sample values measured at room temperature + 25 oC,.

heating system:
   1 imported stainless steel finned heat pipe (alloy heating tube U-TYPE electric heated air mode
   2 heat control: non-contact and other periodic pulse-width-modulated, SSR (solid state relay)
   3 completely independent system, does not affect the freezing and other control lines. Heating system reliable connection, use of imported high-temperature wire line
   4 heating packet control, according to different working conditions, the control system to determine the need to enable the heater to save energy



If you have new requirements, please contact the technical section,Senior engineer to provide you with the most authoritative product testing scheme



Q1:Your company is a trading company or a factory?
A1:We are direct factory, 18 years focused on physical, environmental test equipment development, manufacturing, six years of export experience.
 
Q2:What about the quality of services and products?
A2:Before shipping and delivery of the goods, the quality of the product must be 100% for each inspection and test.
Products use training: each of our products provide video training, to show you how to install and operate.
All the products meet with: ISO, ASTM, AATCC, BS, EN, DIN, JIS, GB and other standards.
 
Q3:How long the delivery time is?
A3:Generally about 15-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
except for the special customization.
 
Q4:Long-range transport packing is strong enough?
A4:The first layer using bubble film packaging, the second layer using vacuum film packaging, packaging away after vacuum, avoid transit instrument rust on the sea, the outer packing using standard wooden case.
 
Q5: What is the payment way?
A5: T/T ; 50% deposit and 50% before shipment.Other payment methods can be negotiated.
 
Q6:How warranties and after-sales services?
A6:18 months warranty.
Life-long free technical support, be video through email.Besides, we can help you to repair your problem controller , even it's not from our factory Produce.
What you need to do is to send us the controller.
Outside the warranty period, professional after-sales service team will provide the perfect technical support, and help customers to solve problems when using our products, deal with guest problems and complaints, and in a professional and timely.
 
Commitment:
We sign a contract, we will sign a letter of commitment, which will increase your confidence in us.