| Brand Name: | leian |
|---|---|
| Rated Voltage: | 48V |
| application: | 4G base station |
| Material: | Q235 |
| name: | DCDU |
Quick Details
Specifications
- 19 inches 1U standard rack installation;
- 2 input and 10 outputs;
- Good insulation for output terminals
- Large discharge current and low residual voltage
- Remote signal alarm connectors (dry contacts of remote signal alarm is closed at normal operation while open at fault condition).
Product model |
DCPD7A |
Nominal operating voltage Uo |
-48V |
Max. Continuous operating voltage Uc |
-75V |
Frequency |
0Hz |
Protection modes |
-48VRTN,-48VPE,RTNPE |
Nominal discharge current In (8/20 us waveform) |
-48VRTN:10kA;-48VPE:15kA;RTNPE:15kA |
Max. Discharge current Imax (8/20 us waveform) |
-48VRTN;15kA;-48VPE:15kA;RTNPE;15kA |
Surge durability(8/20 us waveform) |
-48VRTN:10kA;-48VPE:15kA;RTNPE:15kA |
Rated load current IR |
Input:160A(10 outputs, rated current 16A or Max. Current 25A for each output) |
Limiting voltage |
-48VRTN≤500V |
Connection |
Serial connection |
Distribution capacity |
One input and 10 outputs |
Rated current of breaker |
25A(for each output) |
Local alarm indicator |
None |
Remote signal alarm connectors |
Dry contacts 1 and 3 are closed at normal operation while open at fault. |
Connector |
Input: double crimping connectors |
Output: Spring crimping connectors | |
Wire area |
Input: 10~35mm 2 |
Output: 1~10mm2 | |
Remote signal alarm:0.2~2mm2 | |
Grounding connection |
2 grounding terminals of Φ11mm on the front panel, M6 bolt for fixation |
Dimensions |
482.6mm179.5mm43.6mm |