Handheld Optical light source

1.  General

JF-H430 Handheld optical light source adopts laser light source or LED into the fiber, with Large output power and good stability of output power and wavelength. Meanwhile Its inside modulation function can provide different frequency of pulsed Light. It is an ideal testing instrument which combines advantages of equipment from at home and abroad and can provide 1-4 wavelength Stability output according to customer's requirements. It not only can provide 650nm visual light source, but also can provide 1310and1550 dual wavelength Output to SM fiber measurement.

 

2. Features

High stability of multi-wavelength SM/MM laser output, CW Mode or modulation mode.

Big LCD display operating wavelength and modulating Condition;

Single button switches operating wavelength, convenient Operation

3AA batteries power supply, long operating time

3.Parameter

Operating wavelength	650nm	1310/1550nm	850/1300nm
Emitter type	FP-LD
Output power(typical)	0dBm	-7dBm	-20dBm
Inside modulation	CW/2Hz	CW/270Hz/1000Hz/2000Hz
Fiber mode	SM,MM
Optical interface	FC/PC
Operating supply	3AA1.5V battery
Operating temperature	-10℃～+60℃
Storage temperature	-2℃～+70℃
Battery operating time	45h
Outline dimension	189*99.4*49.8(mm)
Weight	225g

 

4. Accessories

1. Handheld optical light source--------------------------------------------------------1pcs

2. Operation Instruction------------------------------------------------------------------1pcs

3.  AAA1battery---------------------------------------------------------------------------3pcs

5. Panel instruction

5.1 Function instruction

5.1.1 Output port

FC optical patch cord connect with it, put laser output into the fiber.

5.1.2 LCD display Screen

LCD display output Wavelength and frequency modulation.

5.1.3 Power supply Key: long press for about 3s,open or close light source. Press this key in Operation state, can Choose open or close and automatic power off.

5.1.4" WAVE" key

   Press it to choose different output Wavelength, the value will display in LCD

6. Operation instruction

6.1 Put optical connector access into output port.

6.2 Press power supply and open light source, LCD bright.

6.3 Press λ to adjust wavelength of light source.

6.4 Press MODE to adjust the modulation frequency of light source.

6.5 Different operation states of optical light source will indicate in LCD.

6.6 Power off: long press power supply for about 3s,LCD will not indicate, power off.