SCT Pneumatic Tool Change CNC Router is very easily to use. Users only need to save the cutters position in the
Tool path, then system could realize the cutter auto changing according to the cutter code. and the user does not
Need to worry tool changing failed or spindle changing speed etc, also will not feel pity using 8.5kw spindle to drill
6mm holes.

this series support spindle integrated control for multi-head from 2 to 8pcs, can delivery command to spindles to
Work in tandem, also can work similar as CNC router with auto tool changer. Pneumatic Tool Change CNC Router
Allow users to set different tool path for different spindles( cutters), similar working mode as auto tool changer.
When the first spindle complete its work, the second spindle( cutter) can go on its own work automatically.

the advantage using Pneumatic Tool Change CNC Router is its high speed of spindle changing or we call it cutter
Changing, only takes 2 seconds, you can turn on spindle in advance for warming up; could using different spindle,
from 800w to 6.5kw, do not have to use 8.5kw ATC spindle to drill holes; easier maintenance, replace spindle easily;
No exist of tool changing problem, will not have to stop working because of failed tool changing problem, good for
Mass production line.

Pneumatic Tool Change CNC Router prove you that time is money. High efficiency, easier operation, low
Maintenance fee. You only need to install the extra spindle ( ATC spindle is very expensive, while common spindle
Is only 30%-60% around of it at the price).