| Type: | Spray Booths |
|---|---|
| Brand Name: | INFITECH |
| Voltage: | 380V, your special voltage is accepted. |
| Internal Size: | 7000 x 4000 x 2800mm |
| Power: | 20KW |
| Type: | Dry type |
| Model Number: | IT-1101 |
| Place of Origin: | China (Mainland) |
| No Load Speed: | 0.28m/s |
| External Size: | 7110 x 5760 x 3810mm |
| Airflow: | Full downdraft |
| Paint-mist treatment type: | Dry type |
| Warranty time: | 2 years |
| Heating form: | Diesel |
Quick Details
Specifications
Features:
**Factory price;
**Abundant spray booth project experiences;
**Conform to Australian/New Zealand standards;
**Fits auto/truck/bus/furniture/hardware/appliance/elevator etc.
BOOTH DIMENSION
the internal dimension
7000 X 4000 X 2800mm (L X WX H) the external dimension
7110 X 5760 X 3810mm (L X W X H) BASEMENT
Base design forming
Galvanized sheet bending forming, full grids
Basement(H): 350mm and can be adjustableCarrying capacity of the grids
650 kg/wheel Filter area
28m2 Drive-in-ramps
3 pieces; size: 2000*1030*320, Diamond structure Grid description
Size: 997X 756mm, 40X3mm, pressed steel grating grille instead of traditional twisted steel for the rail steel grating. Aesthetics, durability, stress resistance are the most important features of such steel grating. CABIN
Cabin structure
Vertical wall plug Plenum height
600mm WALL PANEL
Wall panel
50mm wall panel, wallboard filler material: heat-resistant rock wool panel Top panel
50mm wall panel, wallboard filler material: heat-resistant rock wool panel Edge material
1.2mm galvanized plate bending forming DOOR
Form
Manual door, 2 + 1 structure Size
3200 X 2700 mm (W X H) Arrangement and quantity
1 set Door description
Containing frame, filled with heat-resistant EPS WORKING DOOR
Form
Frame structure Size
800×2000 mm (W×H) Quantity
1 set Door description
with safety glass observation windows SIDE LIGHTING(Opening out)
Quantity and power
8 sets of light fixtures, each 2 X 36W, total 576W Lighting arrangement
on both sides Lighting description
Protection grade IP55, CE certified electronic ballasts, OSRAM lamp CEILING LIGHTING(Opening out)
Quantity and power
8 sets of light fixtures, each 4X36W, total 1152W Lighting arrangement
on both sides Lighting description
Protection grade IP55, CE certified electronic ballasts, OSRAM lamp Brightness
> 1200Lux FILTRATION SYSTEM
Pre-filter
G3 grade pre-filter plate filter Ceiling filter
F5 class filter cotton, Model SP-600G Bottom paint mist-collection
FIberglass paint-Resistance Filters Exhaust filter
Fiberglass paint-resistance filters with large ventilation volume, small resistance and flame resistance, etc. INLET SYSTEM
Inlet fan (fresh air)
Direct-type turbine fan Inlet fan power and motor description
7.5KW, 970 rpm, 380 V, 50 Hz, Siemens motor Parameter of inlet fan
28000m3/h, 650pa EXHAUST SYSTEM
Exhaust fan (exhuast air)
Direct-type turbine fan Exhaust fan power and motor description
7.5KW, 970 rpm, 380 V, 50 Hz, Siemens motor Parameter of exhaust fan
28000m3/h, 650pa Equipment empty loaded air speed
+/- 0.28m/s NOISE
<78db HEATING SYSTEM
Heat exchanger material
Stainless steel 1Gr18Ni9Ti(SUS304) Heat power
200KW △ T temperature increase capability
20° C (from -10°C to 10°C under painting status) the maximum operating temperature
80°C Heating time
3-5Minutes (from 20°C to 60°C under baking status) Model diesel burner
RG5S PIPELINE CONFIGURATION
Straight
4 pieces Rain hat
1 piece Reducers
2 pieces Manual damper
1 piece Electric damper
1 piece CONTROL SYSTEM
Implementation standards
Standard Y/Δ Drop Starting Control System PLC programmable logic controller
PLC control, higher reliability, lower failure rate Pressure detection
Pressure gauge indicates the pressure in room Function
Painting, heating painting, leveling, emergency stop switch, FailureIndication,over-Temperature alarm indication, Baking Delay Stop Protection Inverter control
Optional SPECIAL ITEM
Rated power:20KW
Safety device:
