| Type: | Ball |
|---|---|
| Structure: | Thrust |
| Outside Diameter: | 0-8 mm |
| Bore Size: | 0-3 mm |
| Brand Name: | NSK SKF FBF |
| Structure: | thrust ball bearing |
| Type: | ball bearing |
| Place of Origin: | China (Mainland) |
| Number of Row: | Single Row |
| Seals Type: | Open 2RS |
| Precision Rating: | P4 P5 P6 P0 |
| Model Number: | F3-8M |
| Precision Rating: | P0,P2,P5,P6,P4 |
| material of the bearing retainer: | steel,Copper,nylon plastic |
| material of the bearing:: | Chrome steel |
| Ring(race)material:: | Chrome steel, stainless steel, ceramics |
| Cage(retainer)material:: | Steel, brass, nylon |
| application:: | gearbox, auto, reduction box, engine machinery, bicycles, etc. |
| Quality standard:: | ISO 9001:2008 |
Quick Details
Specifications
FBF heavy duty turntable Two way Thrust ball bearing 234407BM1ngs
ThRust ball bearings are manufactured as single direction or double direction Thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
ThRust ball bearings are manufactured as single direction or double direction Thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
Specification:
1.Available in two designs: single direction and double direction.
2.to accommodate initial misalignments in an assembly both design.
3. High quality Steel - Ultra clean steel to extend bearing life by up to 80%.
4. Advanced Grease Technology - lubricants that can extend grease life and performance.
5. High Grade Balls - Quiet and smooth operation even at high speed.
6. Optional seating rings take initial misalignment.
Brief introduction of Thrust Ball Bearings:
1. Single direction thrust ball bearings: consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces.
2. Double direction thrust ball bearings: have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. the shaft washer has raceways on both sides and is fixed on the journal. Bearings are able to carry only axial forces in bothDirections.
| Model No. | d | D | d1 | D1 | H | Cr(N) | Cor(N) | Limited Speed | |
| rpm | |||||||||
| Grease | Oil | ||||||||
| F3-8M | 3 | 8 | 3.2 | 7.8 | 3.5 | 600 | 480 | 11000 | 15000 |
| F4-9M | 4 | 9 | 4.2 | 8.8 | 4 | 800 | 520 | 8000 | 12000 |
| F4-10M | 4 | 10 | 4.2 | 9.8 | 4 | 658 | 580 | 6000 | 10000 |
| F5-10M | 5 | 10 | 5.2 | 9.8 | 4 | 950 | 830 | 5100 | 8100 |
| F5-11M | 5 | 11 | 5.2 | 10.8 | 4.5 | 988 | 880 | 5000 | 8000 |
| F5-12M | 5 | 12 | 5.2 | 11.8 | 4 | 988 | 880 | 5000 | 8000 |
| F6-12M | 6 | 12 | 6.2 | 11.8 | 4.5 | 1600 | 1255 | 5000 | 7000 |
| F6-14M | 6 | 14 | 6.25 | 13.8 | 5 | 1800 | 1588 | 4000 | 7000 |
| F7-13M | 7 | 13 | 7.2 | 16.8 | 4.5 | 1422 | 1255 | 4000 | 7000 |
| F7-15M | 7 | 15 | 7.2 | 14.8 | 5 | 2200 | 2000 | 3600 | 7100 |
| F7-17M | 7 | 17 | 7.2 | 16.8 | 6 | 2600 | 2256 | 3500 | 7000 |
| F8-16M | 8 | 16 | 8.2 | 15.8 | 5 | 2500 | 3000 | 4000 | 8000 |
| F8-19M | 8 | 19 | 8.2 | 18.8 | 7 | 3452 | 3000 | 3000 | 5000 |
| F9-20M | 9 | 20 | 9.2 | 19.8 | 7 | 3356 | 2999 | 2500 | 4500 |
| F10-18M | 10 | 18 | 10.2 | 17.8 | 5.5 | 2230 | 2721 | 2500 | 4500 |
