Commodity: IHF Fluoroplastic anti corrosive chemical centrifugal pump
IHF series pump is a horizontal, non-metallic chemical centrifugal pump, compliant with ISO ISO2858, DIN EN 22858. 
Operating range 
Flow: up to 400 m3/h, max 1761 GPM 
Head: 80m  410 feet 
Temperature ratings from - 20 °C to +150 °C;-68°F to+302°F
Brand::ACP
Model No: IHF 40-25-125F
Flow: 6 m3/h
Head: 20 M
Motor Horse Power: 1.5kw
Pump solution:

Lining process is the Patent technical 
the material is  virgin, unfilled lining FEP, Therefore:(1)Considerably easier and more reliable quality control.(2)No reduction in the permeation resistance.(3) Pure pharmaceutical and fine chemical media: no contamination
-Robust pump casing

Pump casing and cover are made of HT200 iron lining with PFA, PTFE, impeller made by WCB wrapped by PTFA, PTFE, which grantee this type centrifugal pump could widely used in corrosive application and wear well. with ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered(pump housing picture)
-Reliable mechanical seal  
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.

Lining process is the Patent technical 
the material is  virgin, unfilled lining FEP, Therefore:(1)Considerably easier and more reliable quality control.(2)No reduction in the permeation resistance.(3) Pure pharmaceutical and fine chemical media: no contamination
-Robust pump casing

Pump casing and cover are made of HT200 iron lining with PFA, PTFE, impeller made by WCB wrapped by PTFA, PTFE, which grantee this type centrifugal pump could widely used in corrosive application and wear well. with ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered(pump housing picture)
-Reliable mechanical seal  
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.

Liquid 

Acid, alkali

Salt solution,

Strong oxidant,

Organic solvents,

Corrosive slurries, solvents,

Hydrocarbons and other strong corrosive medium.

Ammonia water ion film caustic soda

Waste water 

Applilcation

Acid pickling process,

Painting process  

Textile industry, etc

Pharmacy and Health

Electroplating industry

Chlorine water and waste water treatment,  

Petroleum Industry

Chemical Industry

Adding acid process.