Brand Name: | Aoleder |
---|---|
color: | Yellow |
Elongation at Break: | 0 |
Min. Bending Radius: | 0 |
Consistency of rod: | 0 |
Model Number: | CWPP-1S |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
FPC Hotbar Soldering Machine, High Precision Hot Bar Soldering Machine Bonding for FPC to PCB,CWPP-1SFeatures:
1.Unique pulse heat technology provides fastest soldering head heating.
2.Programmable soldering temperature, heat-up rate and time duration for a wide range of products.
3.Thermocouple is fixed in close proximity to the working surface & the
Thermode, thus providing accurate temperature feedback control.
4.Closed Loop PID temperature control with clearly visible LED display.
5.Soldering time can be programmable and is triggered by temperature.
6.Floating thermode ensures consistent pressure and heat transfer between the thermode head and the parts to be joined.
7.Programmable pressure switch with LCD display for precise force control.
8.CCD camera system with magnification lens can be retrofitted for finepitch positioning.
FPC Hotbar Soldering Machine, High Precision Hot Bar Soldering Machine Bonding for FPC to PCB,CWPP-1SSpecification:
Size: 590×640×620mm
Max.Working area: 200×260mm
Working air pressure: 0.45~0.70Mpa
Fixture: 1 set
Weight: 62 kg
Our Service:
# 1 day delivery
# 24 hours fast response
# Largest manufactory in South China
# 100% responsible for quality
# 13 years experience
FAQ:
1.- I see according to the specification there may be up to 1000 files. how many joints can we have per file? I need to know the Programing limitation of the machine.
R: No limit on the joints per each program. More than 1000 files.
2.- Can you Send me user manual of the robot? I need to see the programing abilites. I Need to know every parameter we can set for every joint.
R: We will
Offer the instruction manual when delivery, don't worry about that.
3.- Also where are stored the programs - in the robot or
in memory card?
R: the
Programs are stored in the robot.
4.- What is the teaching pedant for besides programing?
Can I copy soldering programs to another robot CWDH-411?
R:Yes, Program can be copied from 1 robot to another robot.
in Generally, each PCB has 1 program with hundreds of joints.
There are Total 144M storage, 100000 joints take 3M.
If there Are 1000 joints per each program, the robot could store 4800 files.
5.- Is it possible to start the program from particular joint (not from the begining but for example from 5th joint)?
R: Yes, you
Could start from particular joint.
6.- Is it possible to execute only one
Joint?
R: Yes, it is
OK.
7.- Is it possible to set X,Y,Z offest
for every joint? What I mean is if the soldering tip can be set in the way it
Comes into the joint under some angle?
R: Yes, you
Could set offset, solder paste capacity, soldering time for every joint.
8.- Is it possible to set the tip to come
Out from the joint under angle as well?
R: Yes, no
Problem.
9.- Can I set feeding/backing speed for
Every joint?
R: Yes, you
Could set the soldering time for every joint.
10.- I didn't see how much power is the
Soldering heater (I can only see the total machine is 2300Watts)?
R:It is 150W.
11.- Also what is so powerful in the
Robot so it is 2300 watts? Our current robot is 600 Watts total power and it
Is almost the same. the soldering tip is 400 Watts and it has PC inside. So I
Expect the motors to be no more 150 Watss totally. but here we have 2300 Watts?
I am just curious what is so powerful?
R: the machine
Is total 750W, including the soldering heater 150W.
12.- Do we need air for the machine and
If so how much?
R: Yes, need
Air. in generally, it works by 2-3 kg/c㎡. Do you have a
Air pump in your factory? If yes, it is enough, because standard industrial air
Pump has 6-7 kg/c㎡.
13.- Also do you have soldering tip like
below (this is what we use right now)?
R: Yes, we could Custom make according to your soldering requirements based on your PCB if we Don't have exsiting tips.
14.- I forgot to ask you also if it is possible to program Arrays with the robot.
R:Yes, it is ok to program Arrays.
15.-What is the speed for x-y movement?
R:X/Y axis is 600mm/s, max speed for Z axis is 400mm/s