| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|---|
| Warranty: | 1 year |
| Certification: | ISO9001 |
| Brand Name: | Aoleder |
| Condition: | New |
| Dimension(L*W*H): | 180*290*460 |
| Weight: | 55KG |
| Power(W): | 1000W |
| Voltage: | 380V |
| Model Number: | CWPDY |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Hot Bonding System for Terminal Block, CWPDY Feature:
1.Closed Loop PID temperature control with visible LED display
2.LCD display programmable pressure switch for precise force control
3.Each heating cycle is triggered by a real time pressure sensor
4.Floating thermode ensures consistent pressure and heat transfer between the thermode head and the parts to be joined
5.Parts registration is adjusted by micrometer and secured by vacuum lock
6.Could adjust pre-heating and reflow soldering temperature and soldering time
Hot Bonding System for Terminal Block, CWPDY Specification:
Working Area(mm): 200*260
Depression(PA): 0.45~0.70
Controller size(mm): 180*290*460
Weld head: 170*350*400
Input voltage(V): 380
Temperature setting(): 50~600
Temperature precision): 2
Bonding time(s): 1~99
Bonding force(PA): 0.1~0.6:
Precision(PA): 0.05
Our Service:
# 1 day delivery
# 24 hours fast response
# Largest manufactory in South China
# 100% responsible for quality
# 13 years experience
FAQ:
1.- I see According to the specification there may be up to 1000 files. how many joints Can we have per file? I need to know the programing limitation of the machine.
R: No limit on the joints per each Program. More than 1000 files.
2.- Can you send me user manual of the Robot? I need to see the programing abilites. I need to know every parameter We can set for every joint.
R: We will offer the instruction manual
When delivery, don't worry about that.
3.- Also
Where are stored the programs - in the robot or in memory card?
R: the programs are stored in the robot.
4.- What is
the teaching pedant for besides programing? Can I copy soldering programs to
Another robot CWDH-411?
R:Yes, program can be copied from 1 Robot to another robot.
in generally, each PCB has 1 program with hundreds of joints.
There are total 144M storage, 100000 Joints take 3M.
If there are 1000 joints per each Program, the robot could store 4800 files.
5.- Is it possible to start the program from particular joint (not from the begining but for Example from 5th joint)?
R: Yes, you could start from particular joint.
6.- Is it possible to execute only one joint?
R: Yes, it is OK.
7.- Is it possible to set X,Y,Z offest for every joint? What
I mean is if the soldering tip can be set in the way it comes into the joint
under some angle?
R: Yes, you could set offset, solder paste
Capacity, soldering time for every joint.
8.- Is it possible to set the tip to come out from the joint
under angle as well?
R: Yes, no problem.
9.- Can I set feeding/backing speed for every joint?
R: Yes, you could set the soldering time for
Every joint.
10.- I didn't see how much power is the soldering heater (I
Can only see the total machine is 2300Watts)?
R:It is 150W.
11.- Also what is so powerful in the robot so it is 2300
Watts? Our current robot is 600 Watts total power and it is almost the same.
the soldering tip is 400 Watts and it has PC inside. So I expect the motors to
Be no more 150 Watss totally. but here we have 2300 Watts? I am just curious
What is so powerful?
R: the machine is total 750W, including
the soldering heater 150W.
12.- Do we need air for the machine and if so how much?
R: Yes, need air. in generally, it works by 2-3
Kg/c.
Do you have a air pump in your factory? If yes, it is enough, because standard
Industrial air pump has 6-7 kg/c.
13.- Also do you have soldering tip like below (this is what
We use right now)?
R: Yes, we could custom make according to your Soldering requirements based on your PCB if we don't have exsiting tips.
14.- I forgot to Ask you also if it is possible to program arrays with the robot.
R:Yes, it is ok to program arrays.
15.-What is the speed for x-y movement?
R:X/Y axis is 600mm/s, max speed for Z axis is 400mm/s