Wire Robotic Soldering Equipment Assembly Solutions, CWPC-3A Feature
1. According to different products, optional temperature for your choice.
2. Unique material thermode head, ensure the average pressure
3. Has vacuum function, easier for adjustment and positioning.
4. NC temperature, clear and high precision
5. with digital pressure gauge, pressure range can be preset.
6. Microcomputer control, high accuracy and stable.
7. Programmable curve Including pre-heating and reflow soldering temperature.
8. Suitable for all kinds of high density TAB, TCP and pressure to FPC, FFC and PCB soldering pressure welding.
9. Precise PID control, phase angle replace pulse drive.
10. Less Libration, less noise, avoiding voltage fluctuate
11. Rotable dual fixtures with high working efficiency
12. Touch screen input data, simplify the operation.

13. Real-time display temperature curve and temperature data

Wire Robotic Soldering Equipment Assembly Solutions, CWPC-3A Technical parameters

Machine size:	660660720mm
Working area:	Max 120*120mm
Machine weight:	95Kg
Working air pressure:	0.6-0.8Mpa
Power supply:	AC220V10% 50HZ,2200W
Temperature settings:	Two
Working environment:	10~60, 40%~95%
Welding pressure:	1~20Kg
Temperature settings:	RT~500 tolerance 5
Pressing time:	1~99.9s
Welding precision:	Pitch 0.2mm
Thermode head size:	Max 60*3mm
Fixture quantity:	2
Alignment mode:	CCD + LCD Monitor
Feeding mode:	Manual
Starting mode:	Press two start button
Heating mode:	Heating pulse rise time of 1~2 seconds
Rotation Platform:	Cylinder control tolerance<0.02mm

Wire Robotic Soldering Equipment Assembly Solutions, CWPC-3A Application

for a variety of high density TAB, TCP crimping and FPC, FFC and
PCB solder crimp.

Our Service:
# 1 day delivery
# 24 hours fast response
# Largest manufactory in South China
# 100% responsible for quality
# 13 years experience

FAQ:
1.- I see According to the specification there may be up to 1000 files. how many joints Can we have per file? I need to know the programing limitation of the machine. 

R: No limit on the joints per each Program. More than 1000 files.

2.- Can you send me user manual of the Robot? I need to see the programing abilites. I need to know every parameter We can set for every joint. 

R: We will offer the instruction manual When delivery, don't worry about that.
3.- Also Where are stored the programs - in the robot or in memory card?

 R: the programs are stored in the robot.
4.- What is the teaching pedant for besides programing? Can I copy soldering programs to Another robot CWDH-411? 

R:Yes, program can be copied from 1 Robot to another robot.

in generally, each PCB has 1 program with hundreds of joints.

There are total 144M storage, 100000 Joints take 3M.

If there are 1000 joints per each Program, the robot could store 4800 files.

5.- Is it possible to start the program from particular joint (not from the begining but for Example from 5th joint)? 

R: Yes, you could start from particular joint.
6.- Is it possible to execute only one joint? 

R: Yes, it is OK.
7.- Is it possible to set X,Y,Z offest for every joint? What I mean is if the soldering tip can be set in the way it comes into the joint under some angle? 

R: Yes, you could set offset, solder paste Capacity, soldering time for every joint.
8.- Is it possible to set the tip to come out from the joint under angle as well? 

R: Yes, no problem.
9.- Can I set feeding/backing speed for every joint? 

R: Yes, you could set the soldering time for Every joint.
10.- I didn't see how much power is the soldering heater (I Can only see the total machine is 2300Watts)?

R:It is 150W.
11.- Also what is so powerful in the robot so it is 2300 Watts? Our current robot is 600 Watts total power and it is almost the same. the soldering tip is 400 Watts and it has PC inside. So I expect the motors to Be no more 150 Watss totally. but here we have 2300 Watts? I am just curious What is so powerful? 

R: the machine is total 750W, including the soldering heater 150W.
12.- Do we need air for the machine and if so how much?

R: Yes, need air. in generally, it works by 2-3 Kg/c. Do you have a air pump in your factory? If yes, it is enough, because standard Industrial air pump has 6-7 kg/c.
13.- Also do you have soldering tip like below (this is what We use right now)?

R: Yes, we could custom make according to your Soldering requirements based on your PCB if we don't have exsiting tips.

 14.- I forgot to Ask you also if it is possible to program arrays with the robot.

R:Yes, it is ok to program arrays.

15.-What is the speed for x-y movement?

R:X/Y axis is 600mm/s, max speed for Z axis is 400mm/s