| Type: | Waterproof Membrane |
|---|---|
| Brand Name: | choice link |
| Type: | waterproof membrane |
| Color: | black |
| Thickness: | 2mm,3mm,4mm,5mm |
| Length: | 10M |
| Model Number: | CL-L-01 |
| Place of Origin: | China (Mainland) |
| Width: | 1M |
| Surface Materials: | PE film, sand surface,MIneral , sand |
| Reinforced: | polyester or fiberglass |
| Tension: | 400N |
| Elongation: | 30% |
| Temperature resistance: | -25 |
| Product Name: | SBS/app bitumen waterproof membrane |
Quick Details
Specifications
Product Information
Thickness: 2.0mm,3.0mm,4.0mm,5.0mm
Reinforced: polyester felt or fiberglass reinforced
Surface: PE film, Aluminum film, sand surface, minral surface
Width: 1M
Length: 10M
Upper surface isolate material: Polyethylene film (PE), Fine sand (S), mineral (M).
under the surface isolate material: Polyethylene film (PE), Fine sand (S).
Used for Widely used in industrial and civil construction of the roof, basement, bathroom and other waterproofing works and roof gardens, roads, bridges, tunnels, parking lots, swimming pools and other projects waterproof and moisture.
Characteristic
SBS/APP mineral finish bitumen waterproof roof membrane
A) SBS bituminous roof materials is specially used as waterproof material in cold area
B) APP bituminous roof materials is specially suitable for areas of high temperature and of strong sun-shine Cheap Bitumious roof materials for building construction/ bitumen roofing membrane
C)Good performance in Good impermeability,anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering
D)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack
Construction and Application
A) One way is by heating and melting method.Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane filly bonded to the roof deck with overlaps of 5-10cm.
B) the other way is by cold adhesive method.Pour the cold adhesive homogeneously on the roof deck, then roll the membrane to install it to be fully sticked to roof deck.
by heating and melting method and by cold adhesive can be used in alternation in application as requested.
C)after application,a full serious inspection is required to sure no air bubble,no falling away.etc. to guarantee the waterproof life.
Notice:
1.the base should be dry and clean. Do not work in the rainy or snowy day.
2.Do not work under heavy wind(above 5 grade)
3.Unsuitable for construction below 5C
4.If it is rain or snow in the process of construction, protective measure to the laid membrane is must.
5.All the workers should put on special uniforms to keep safe when installing. There should be equipments for fire controls.
Contact US
