Features:

  

SME-6100 is a high-end in line PCBA DI water cleaning Machine. Only use DI water to clean water-sular solder paste flux and non-clean Solder paste flux on SMT or THT PCBA after welding.It is mainly use on Aviation, aerospace, medical, new energy, automotive electronics, digital Meters industries.

1.      Big quantity PCBA in line DI water cleaning system.

2.      Super cleaning result. Thoroughly clean water-sular Solder paste flux and non-clean solder paste flux on SMT or THT PCBA after Welding.

3.      Multi-areas DI water cleaning process, Pre-clean, clean, Final spray clean, air knives shear, hot air dry are completely according to Settings.

4.      Fresh DI water supply automatically, post-area DI water overflow To the previous-area.

5.      up/down DI water spray pressure can be adjusted, water Pressure shown on meters.

6.      DI water spray pressure can reach to 80 PSI, it can Permeate to PCBA bottom gap and make thoroughly clean.

7.      Standard equipped with Resistivity monitoring system, Resistivity range 0~18 M.

8.      PCB flat net conveyor system, stable and no deviation.

9.      PC control system, Chinese/English operation interface, Program and parameters setting, load, save and change are very convenient.

10.   Total SUS304 structure, Acid and Alkali corrosion Resistance.

Technical details:

Item	SME-6100 Spec
Conveyor Net width	600mm
Conveyor net speed	100~1500mm/min, Suggest 300~400mm/min
Conveyor height	90050mm
PCB conveyor direction	from Left to Right
PCB width	60~600mm
PCB clean height	0~100mm
Clean tank	300L
Rinse tank	300L
DI water Consumption	1~1.5m/H
Exhausted air	12m/H
Control	PC+PLC
Power/air Supply	380VAC,3P,50/60HZ,70KW/0.5Mpa
Resistivity Range	0~18M
Machine Size	4350(L)x1530(W)X1620(H)mm
Machine weight	1500KG

 

Operation method of useage:

  One key operation, PLC or PC control.

Package:

  Ply wood package with vacuum package inside.