Material Type: | Paper |
---|---|
Brand Name: | suntek |
Type: | Heat Transfer |
Temperature: | High |
Application: | Bag |
Material: | White Paper |
Material Type: | White paper |
Model Number: | STC-T08 |
Quick Details
Specifications
Application
Advantage
1. Customize Fabric with favorite photos and color graphics
Operating Process and PRecautions:
1. Printing
- Apply the transfer paper to a color inkjet printer. Recommend to select "Photo Quality Inkjet Paper" mode in the "Printer Media Type Setting" for satisfactory printing results.
- Print the image onto the transfer paper, and leave it to dry for about 10 minutes before transferring.
- Trim off the unprinted blank area, leaving the image a narrow margin of 5 mm.
2. Transferring
- Preheat the heat press machine, and set the recommended transfer temperature to 150-165C.
- Peel the support paper from the printed (i.e. Imaged) coating which would remain as a film-like material;
- Place the imaged coating (i.e. Film-like material) onto the textile with the printed (image) side facing upwards.
- Place a sheet of protective paper on the image, with the glossy side of the protective paper facing downwards;
- Transfer for 15-30 seconds and then remove the textile, peel the protective paper after cooled.
3. Washing
- after transferring, it's best not to wash the textile in 24 hours.
- Wash the textile in 30-40C water or cold water, with the transferred pattern inside out.
- Do not wash with strong alkaline detergents, and no bleach. Avoid rubbing the transferred pattern too hard.
- Do not wring. Line dry in shade recommended.
- Do not dry-clean.