| General Composition: | Base Oil |
|---|---|
| Specification: | Industrial Standard |
| Type: | Metal working fluid |
| Application: | Industrial Lubricant |
| Brand Name: | SKALN |
| Model Number: | Squastar 370 |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
SKALN Squastar 370 Plastic Material Cutting Fluid Metal Working Fluid
Product Description
- SKALN Squastar 370 is a kind of high performance, good resistance of mixed oil, full synthetic metalworking Fluid. for processing sapphire, ceramic and other high precision materials. Also can be good for low to medium load cutting procession. When take place of the traditional polyether formulations for grinding procession, it has a very low foam tendency, excellent special cutting debris cleaning, sedimentation, perfect cooling property as well as good resistance of mixed oil.
- SKALN Squastar 370 is suitable for grinding and cutting the gem, ceramics, aluminium alloy, ferrous and copper alloy. Products can be prepared into a grinding fluid concentrate by any proportion of water.
- Recommended dilution ratio: 5%.
- with the increasingly demanding on-site and emission requirements, Squastar 370 synthetic cutting and grinding fluid has become a leader of high-speed cutting fluid.
Full-synthetic type |
Microemulsion type |
No foaming material |
Contains a surface active ingredient that is easy to foam |
High-molecular-weight polymer does not degrade |
Contains mineral greases |
the working fluid is transparent and the workpiece is visible |
Working fluid half or opaque, the workpiece visibility is not good |
ODorlessness |
OIl, fat smell |
Product parameter
Apperance (concentrated solution) |
(Light transparent liquid) |
Density,20,g/cm3 |
1.08 |
PH value,2.5% distilled water |
8.5-9.0 |
Anti-rust property, cast-iron scrap,1.5% |
IP287 |
Aqueous solution,2h |
No Rust |
IP287 Water=345ppm |
CaSO42H2O |
Product application
- SKALN Squastar 370 is suitable for grinding and cutting the gem, ceramics, aluminium alloy, ferrous and copper alloy.
for processing sapphire, ceramic and other high precision materials.
Also can be good for low to medium load cutting procession.
When take place of the traditional polyether formulations for grinding procession, it has a very low foam tendency, excellent special cutting debris cleaning, sedimentation, perfect cooling property as well as good resistance of mixed oil.
Product advantage
N Excellent cooling performance, suitable for non-metallic and metal fitting of the workpiece processing;
N Excellent anti-miscellaneous properties, working fluid long-term to maintain transparency
N Excellent chip / chip separation and settling;
N Ultra-low foam. Suitable for high pressure and high flow of processing fluid applications, widely used in a variety of stand-alone and centralized for the liquid system;
N Excellent anti-rust performance, to meet the requirements of rust between the procession;
N Does not contain nitrite, phenol, chlorine, phosphorus, sulfur. Acid and alkaline moderate, the human skin irritation is minimal;
N Excellent resistance to bacteria and fungi, long service life;
N Excellent cleaning performance, the machine and the workpiece clean.
Attention
- Please do not mixed with other emulsions, semi-synthetic fluids, and all synthetic fluids into this product. Because even a small amount of already corrupt residue in the system can affect the effectiveness of the new liquid.
Product packaging:
Please see below picture, our stanDard including 18L per plastic barrel and 200L iron Barrel. the color will depend on the production batch. Before the cargo ready to ship, I can send you the final package. I am sorry for can not tell the exactly package color before production.
1 20ft container can hold about 80 barrels of 200L/barrel.
Company Profile
About
SKALN Oil (Chongqing) Co.,Ltd was established in 2011 in Chongqing, China. We have a more than 15-year-old head office in Shanghai, China.
after more than 15 years of accumulation and growth, we have rich experience in production. Every process is strictly monitored.
Also have companies in Chongqing and Shanghai,China, of course, have factpories,respectively.
Our brand and logo comes from the nature, it means we pursue environment-friendly and sustainable development. At the same time, we believe in win-win cooperation so that we can go further.
FAQ:
how to choose cutting fluid correctly?
First of all, to understand the characteristics of oil-based and water-based cutting fluid. In general, the lubricate performance of oil-based cutting fluid is better. the cooling performance of water-based cutting fluid is better. And the emulsion has lubrication, anti-rust property, cooling and cleaning property, but easy to produce micro-organisms and deterioration. SKALN Oil helps you do the following analysis in two ways:
1.about the workpiece material:
for some materials that difficult to process should choose the cutting fluid with high activity, anti-wear, extreme pressure additives; for some materials that easy to process should choose the cutting fluid without extreme pressure additives.
When cutting Non-ferrous metals and light metal, and the cutting force and cutting temperature are not high, please choose mineral oil and high concentrations of emulsion.
When cutting Alloy steel, if the cutting amount is low, the surface roughness requirements are smaller (such as broaching and thread cutting), so can choose extreme pressure cutting oil and high concentration emulsion. When cutting Cast iron and bronze and other brittle materials, the cutting often formed collapse broken chips, easy to flow with the cutting fluid everywhere, flow into the machine between the guide parts damage, you can use low concentrations of emulsion with good cooling and cleaning performance.
2. about processing methods:
When higher cutting speed and rough cutting process (such as turning, milling, drilling), require cutting fluid with good cooling performance, then should use water-based cutting fluid and low concentration of emulsion.
in some precision high-strength processing (such as broaching, tapping, deep hole drilling, gear processing), this time cutting fluid with excellent lubrication performance, you can choose extreme pressure cutting oil and high concentration of emulsion.
A. Tool steel tool: the heat resistance of such tools in the 200 - 300, poor heat resistance, high temperature will lose hardness, so use the cutting fluid with good cooling performance and low concentrations of emulsion is appropriate.
B. High-speed steel cutting tools: high-speed rough cutting, large cutting quantity, resulting in a lot of cutting heat, to avoid damage to the workpiece and affect processing quality, should choose good water-based cutting fluid; if high-speed steel tool for low processing and in order to reduce the friction between the tool and the workpiece, inhibit the formation of cutting tumors to improve the processing accuracy, generally choose oil-based cutting fluid or high concentration of emulsion.
C. Carbide tools: such tools have higher melting point and hardness, better chemical and thermal stability. Oil-based cutting fluid can be used in general processing.When it's heavy cutting, high cutting temperature, easy to wear the tool quickly, you should use the cooling lubricating fluid with adequate flow, and the 3% - 5% emulsion is appropriate (by spray to cooling will be better).
D. Ceramic tools, adamas tools, cubic boron nitride tools: these tools hardness and wear resistance is high, cutting generally do not use cutting fluid, and sometimes can use water-based cutting fluid.