1.General Information

 

HDPE Silicon MicroductsPipe Making Machine General Description:

• 1)the HDPE silicon microduct pipe making machine,is used to produce two layers composite HDPE silicon micro duct,adopt advanced multiple extruder synchronousCo-extrusion technology.
• 2)Main raw materialIs HDPE&Silica filter.
• 3)the manufactured pipe: HDPE silicon micro duct is widely used in the Opticalcable communication network system of expressway,railway.
• 4)KAIDE factorySpecialized in multilayer composite pipe extrusion machine for over 15 Years,has exported to many countries and area in the world,such as Russia,Korea,Japan,Iran,Mexico,Saudi Arabia etc,and enjoyed customer'S good  praise.

 2. HDPE Silicon micro duct machine specification:

 

Model	Extruder 1	Extruder 2	Production Speed	Line Length	Nominal Power
KDGX-1	SJ-65/33	SJ30/25	15m/min	22mx3.5mx2.5m	75KW
KDGX-2	SJ-60/36	SJ45/30	30m/min	35mx4mx3.0m	135KW
KDGX-3	SJ-75/36	SJ50/33	50m/min	50mx4mx4.5m	190KW

 

 

3.Manufactured Pipe Photo

 

No.	Diameter	Thickness 1	Thickness 2
1	5mm	0.75mm	1.25,mm
2	7mm	0.75mm	1.5mm
3	10mm	1mm	2mm
4	12mm	1mm	2mm
5	14mm	1mm	2mm
6	16mm	1mm	2mm
7	18mm	1mm	2mm

 

 

Its construction has the following characteristics:

• 1)Two layers, inner and outer layer is manufactured by the technology of Synchronized extrusion of PE in order to achieve the tight joint without separation.
• 2)Inner Wall of duct has two kinds: smooth inner wall or the inner wall with Longitudinal ribs to guide the airflow. No matter which kinds, both are Permanently solid lubricant layer with very low friction of coefficient.
• 3)the duct surface is smooth without defects such as visible holes or scars..