Radar Sensor LED Light Lamp Auto Motion Sensor Detector Light Switch

Allmay Microwave (Radar) Motion Sensor is an active motion detector, it can detect movement objects. Including humen movement, car moving, animal etc.

Widely used for Motion-activated LED Lighting, LED Strips, Alarm, Security System, Automatic sensory device and more.

Features

• Delay time: setting 3s-180s adjustable
• Sensor distance: 0.3-22ft adjustable (1-10m)
• Light sensor: 10-100lux adjustable
• Automatic induction: When people/car enter into the range of induction, it will turn on the light with fulll brightness, after the delay time, it will turn off. during the delay time, if motion detected, the delay time will reset, and start a new delay time.
• Detection is possible through doors, woods, panes of glass or thin walls.

Technical Specification

• Model: AM-RS-06
• Input Voltage: 185V-265V AC / 50Hz
• Output Voltage: 185-265V AC
• Sensing principle: 5.8Ghz microwave motion detector
• Material: Flame-retardant ABS
• Rated Load: 5-200W (Incandescent Lamp, Energy saving, Fluorescent Lamp)
• Transmission power:<0.5 W
• Operating Temperature: -20 ~ +65C
• Detection area:  0.4ft-32ft adjustable
• Hold time: 3s~140s adjustable
• Daylight threhold: 3~100 lux adjustable
• Microwave Emission: < 10mW
• Coverage: 180*360 (depends on fitting and surrounding)
• Install: indoor, Ceiling mounting, wall installation
• Installation height: Max. 5m/ 20ft
• Dimension (L*W*H): 75*40*30mm

Note: 

1. Don't over load or short circuit

2. Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.

3. Don't fix it at a place where there are obstructing material. (Metal)