Product Main

Quick Details

Machine Type: Other
Material: Steel
Certification: CE
Brand Name: Chuangwei
Condition: New
Machine Type: Automatic
Dimension(L*W*H): 1380*2100*1400mm
Model Number: CW-5600
Place of Origin: China (Mainland)
color: Gray
Elongation at Break: no
Min. Bending Radius: no
Consistency of rod: good

Specifications

SMT PCB cleaning system PCBA Cleaner with 645L560W100H Cleaning Basket

Multi-Stage Ultrasonic Cleaning System,CW-5200 Specifications:

 Cleaning basket size: 1000mm Diameter round basket 200mm(H), Special size need to be customized

 Cleaning fluid capacity: 80L( maximum )

 Rinse fluid capacity: 80L( maximum )

 Cleaning method:  Spray rotary cleaning and rinsing

 Dry way:  Heated air knife dry

 Recommended cleaning time: 5-20 mines

 Recommended rinse time: 2-3 mines

 Recommended drying time: 5-20 mines

 Cleaning filter:  Using 3-level filtration

 Class 1 filter: 2mm( Filter impurities )

 Class 2,3 filters: 100um/20um( Filter flux, rosin and so on )

 Blower: 3.7KW Heated to 80

 Electric pump: 2.2KW/1.1KW

 Diaphragm pump:  1 inch diaphragm pump (pumping, drainage)

 Air supply: 0.5Mpa~ 0.7Mpa,600-800L/min

 power supply: AC380V,3Phase,22KW

 weight: about 500KG

 dimension: 1380(L) 2100mm(W) 1400mm(H)

CW-5200 Machine and artificial / ultrasonic cleaning fixture comparison :

    

Spray cleaning

Manual or ultrasonic cleaning

Comparing results

            Spray pressure can be adjusted, batch cleaning, fast and efficient

   Cleaning time is long, low efficiency

          One-touch operation, no   need to special cleaning personnel

              Iron brush fixture, dirty, tired, need special cleaning personnel

               up and down, around the full range of cleaning, cleaning thoroughly, high cleanliness

          Fixture on the dead, the surface dirty, cleaning difficult

           the solution is recycled several times to save the solvent

Need to immersion cleaning, cleaning costs are high,

  Spray cleaning and rinsing, governance well intact

              Iron brush cleaning will be raised, the surface off the phenomenon, the impact of follow-up product quality

           Cleaning + rinse + dry,  after cleaning the surface without solvent

           No rinse, after cleaning solvent residue, after the use of heat after the smell of smell out

Stencil Cleaning System,CW-5200 Advantages:

1. Touch screen display, one-button operation, one person cleaning, saving labor

2. Water-based cleaning fluid, environmental protection

3. the cleaning solution is recycled to save the solution

4. Batch cleaning,cleaning fast and efficient

5. Equipped with a wind knife, can be completely dry

6. up and down, around the full range of cleaning, cleaning thoroughly, high cleanliness

7. Spray cleaning, governance with intact