the following example is for you reference.


1.Brief Introduction:

Hollow particle-board (also known as "bridge holes mechanics board") is made through Crushing the wood material and high temperature extrusion presses. the products Possesses such characteristics of sound insulation, heat preservation, impact Resistance, good dimensional stability and stiff newness, having overcome the Natural disadvantages of wood, including shrinking when dried and expanding When moistened. Because of the hollow structure, the wood also has prominent Advantages including small weight and high strength.

 

the use rate of the product is very high and the connection is easy. It is very suitable for making Wood doors and furniture as well as separation of public places such as office, Commercial and entertainment. 

  

 

2.Techincal parameters:

  

Main technical Data

L  Board width max.:                    2090mm

L  Board thickness range:              24-45mm

L  Main motor power of main shaft:        22 KW

L  Installed power:                     37KW

L  Hammer stroke:                    80-120times/min.

L  Heating temperature:                160C-180C 

L  Glue type:                           urea formaldehyde Adhesive 

L  after drying moisture:                8-10%

L  Daily capacity:              about 320 sheets per day (based on 2090*1180*33mm)

L  Machine net weight:                     16000Kg

L  Machine dimension:                   4000*1300*2500mm

L  Main parts of Electrical control system:    Siemens, Schneider, Omron

L  Main shaft bearing brand:               NSK

L  Main motor:                    Siemens

 

3.Performance features:

L  the mould is functional and durable and Convenient for replacing.

L  Processed with nitrogen treatment, this Mould is wear-resistant and has high strength.

L  Theoretically, the mould realizes zero wear Rate which highly increases the service life and reduces the noise and energy Consumption.

L  If worn, the sliding block can be replaced without removing the connecting rod.

L  the two-stage drive provides  convenience for handling the machine problem.

L  Positive and negative wires on the roof Beam is convenient for opening the press plate for maintenance and machine Problem handling.

L  Single fixed, the fastening screw makes it More convenient for board discharging in production.

L  both being processed by chrome finish, Wear-resisting plate and blanking roller is anti corrosion and wear-resistant.

L  the main bearing adopt NSK.

L  Walking beam is cast by Chinese famous Casting factory. All the walking beam are carried out with flaw detection and the material list could be provided.

L  Electrical part adopt the brand, such as Siemens, Omron, Schneider and etc.

L  Press plate is provided by Chinese famous Press plate factory.

L  the extrusion press machine is added with density Adjustment device which widens the density adjusting range of the final Product.

L  the weld assembly is treated with aging Treatment. the certificate of heat treatment can be provided.