1.Solder Paste Screen Printing Machinery,CW-L8 Specifications:

Model		CW-L8
Screen Frames	Min Size	650X400mm
	Max Size	850X850mm
	Thickness	25~40mm
PCB Min Size		80X50mm
PCB Max Size		650*610mm
PCB Thickness		0.4~6mm
PCB Warp age		1%
Transport Height		90040mm
Transport Direction		Left-Right;Right-Left;Left-Left;Right-Right
Transport Speed		Max 1500Mm/S Programmable
Board Location PCB	Support System	Magnetic Pin/up-down table adjusted/support block  by hand
	Clamping System	SIde clamping,vacuum nozzle,Automatic retractable Z pressure
Print head		Two independent motorised print heads
Squeegee Speed		6~200Mm/sec Motor Control
Squeegee Pressure		0~15Kg Motor Control
Squeegee Angle		60/55/45
Squeegee Type		Stainless steel(Standard), plastic
Stencil Separation Speed		0.1~20mm/sec Programmable
Cleaning System		Dry,Wet,Vacuum (Programmable)
Table Adjustment ranges		X:10mm;Y:10mm;:2
Solder Paste Inspection		2D Inspection(standard)
Machine
Repeat Position Accuracy		0.01mm
Printing Accuracy		0.025mm
Cycle Time		<11S (Exclude Printing & Cleaning)
Product Changeover		<5Min
Air Required		4.5~6Kg/cm2
Power Input		AC:22010%,50/60HZ 1 3KW
Control Method		PC Control
Machine Dimensions		1330(L)X1530(W)X1500(H)mm
Machine Weight		Approx:1200Kg

2.Stencil Printers,SMT Stencil Printers for Aluminum LED / PCB,CW-L8

3.Automatic Printed Circuit Board Screen Printer,CW-L8

1.Scraper system

*Arch bridge hanging straight with scraper

*Programmable suspension self-adjusting stepper motor drive print head.

*Bilateral double-slider four-wheel-type structure to ensure that the scratch before and after the operation of the accuracy and smoothness.

*Designed for the different requirements of the front and rear scraper pressure and the stability of the lift, to prevent the solder paste leakage and the blade has a certain flexibility of the clamping design, scraper pressure, lifting speed, printing speed,printing range are software adjustable to provide customers with a variety of stripping methods to meet the different requirements of the PCB board, to provide customers with a good printing control platform.

*slide-type scraper system to improve operational stability and extend the services life;Fully closed ring scraper pressure feedback device, always monitor the size of the squeegee pressure,making the tin more full.

2. Steel mesh positioning system
the size of steel mesh has good and wide applicability;

the imported SMC cylinder is used as the cylinder

Embedded scale, never fall off;

Segmented fixed steel frame.

3. Image and optical path system

X, the Y-axis USES the Japanese black field high ground wire rod, the two ends Japan matsushita motor drive;

Internal increase polaroid, automatic accurate grasping different type of the MARK point;

Upper, lower and coaxial 3 uniform light source;

Japan's Toshiba industrial camera.

4. PCB transportation and positioning system

the inlet direction arbitrary selection, free combination;

Special process of inner tooth transport belt, prevent card board;

Programmable transport speed control can make the suspension more accurate;

Use the sexual side clamp and vacuum suction chamber, effectively clamping the PCB to ensure the; complete smooth contact between PCB and steel mesh.

5. Cleaning system

Spray type cleaning;

Dry, wet, vacuum-free combination;

Separate cleaning structures;

Circular cleaning rubber strip;

Cleaning fluid, and steel net cleaning paper amount controlled.

6. Platform calibration system

UVW platform structure, high precision, large rigidity and compact structure

Triaxial linkage, small volume, high precision

7. Base and rack system

Solid forming;

Panasonic motor plus Japan original plant high precision ground wire rod;

High rigidity, high stability of left and right symmetrical frame structure.

8. Electrical road system

Safe and concise circuit gas circuit layout;

the circuit gas road erect the two sides and the rear of the machine, the maintenance is convenient.

9. Operating system

Easy to learn easy to use friendly operation interface, with good man-machine dialogue function;

the program file has teaching and navigation functions, and every step has a hint;

Switch between Chinese and English;

It has operation log, fault recording analysis and diagnosis.

10. Other functional options

Automatic point glue function;

Automatic scanning function;

Automatic add tin function;

the whole line closed loop control;

Constant temperature and humidity function;

Steel mesh plugging function;

Other functions can be customized according to customer's actual demand.