the water quality after being purified by PAC is better than that of being Purified by the flocculating agent of Aluminium Sulphate. Accordingly, the Water purification cost by using PAC is 15%-30% lower than using Aluminium Sulphate.
It isFaster to form Flocculation body and sedimentation speed is faster. the purifying processing Capacity is larger than aluminum sulfate and other traditional products.

 the consumption of Alkalinity in the water is the least among all kinds of inorganic flocculants. Alkali agent is needed little or none.

PAC could be used in the source water with PH5.0-9.0.

E) PAC causes little corrosion and the operating conditions are easier to be satisfied.

F)  the solubility of PAC is better than that of Aluminum Sulfate.

It generates less salt in the purified water and this is in favor of icon exchange processing and making high purity water.

H) the PAC has better Adaptability of the source of water temperature than that of Aluminum Sulfate and other inorganic flocculants.

 

the Application Fields of Polyaluminium Chloride areas:
1. Water purification treatment for domestic water and industrial water;
2.the city sewage treatment;
3. Industrial wastewater, sewage and sludge treatment and some slag quality in Sewage recycling, etc.;
4. for some processing industrial wastewater that is difficult to treat, we can Use composite PAC which is allocated by PAC as the matrix and mix with other Reagents. It can get better water treatment results.

 

PAC Polyaluminium Chloride

the product is made of high purity raw materials. and It is high-efficient, cheap and nontoxic inorganic high molecular compound. It Is the highest purity polyaluminium chloride, each index have reached the International advanced standard. It is easily soluble in water and has high Purity.

 

2. Product Performance:

the solid type is Light yellow & deep yellow powder with beautiful appearance; liquid type is Colorless and transparent.

 

3. Product Properties and Advantages:

 

1.     Good Effective and lower cost.Its purifying Effect on low-temperature, low-turbidity and heavily organic-polluted raw water Is much better than other organic flocculants, furthermore, the treatment cost Is lower.

 

2.     Flocculation Ability.It can lead to quick formation of flocculants with big Size and rapid precipitation service life of cellular filter of sedimentation Basin.

 

3.     PH Broad in scope.It can adapt to a wide range of pH value (59), and can Reduce the pH value and basicity after processing.

 

4.     Adopting to various source of water.the dosage is Smaller than that of other flocculants. It has wide adaptability to the waters At different temperatures and at different regions.

 

5. Higher basicity, lower corrosive, easy for cooperation, and Long-term use of non-occlusion.

 

 4. Specification:

Specification	Analysis Result(solid)	Analysis Result(liquid)
Aluminium oxide (Al2O3)%	31%	10-19%
Basicity %	40-90%	40-90%
PH	3.5-5.0	3.5-5.0
Water insoluble %	0.1	0.1

 

5. Application field:

It is widely Applied inDrinking water purification, wastewater treatment, cosmetic Filling agent, paper production, tanning, sugar manufacturing, oil extractionand so on.

 

6. Package:

the solid: PP Woven bag with PE inner liner (25kgs/bag) or PE bag (20kgs/bag).

the liquid: Packed in polyethylene bucket (1ton/unit)

 

7. Storage:

 the product shall be sealed and stored in the dry and Ventilated place to prevent from rain, high temperature and strong sunlight.

 

8. Loading of Port:Qingdao Port, China

 

9. Container Volume:25tons/Fcl for Waste water and 20mts/Fcl for drinking water treatment.

 

10. Payment Terms:T/T or  L/C at sight

 

11. Application &Notes

1) Before using, the solid Product shall be diluted toAl2O3 liquid, and the normal dilution ratio is 5%-15%.

2) the liquid Product can be used directly or used after dilution.

3) the specific dosage is Based on the flocculation tests and site trial. the usual dosage of the liquid product Is 3-40 g/ton, and of the solid product is 1-15 g/ton.

4) the shelf life is 6 Months for diluted liquid product and 12 months for the solid product.