Lime Rotary Kiln for Quick Lime, Active Lime Calcination 50tpd 800tpd

 

 

Product Description

ZK Corp produces  Lime Rotary Kiln with the Diameter1-5 meters, widely applies in the metallurgy, the chemical industry, Bears professions and so on material, Ceram site, papermaking. this kind of Kiln's supporting is divided into two forms of rolls and skids, the Transmission may use direct-current or the exchange frequency conversion Velocity modulation, and has many kinds of form seals to adapt the different operating Mode

 

Rotary Kiln is thermal equipment to heat materials. It is widely used in the fields of Cement, nonferrous metallurgy, ferrous metallurgy, refractory material, Chemical, and making-paper.

 

ZK Corp could also meet different needs from different customer to produce Non-standard rotary kiln.

  

Product features of Lime rotary kiln:

1. Support device: advanced shaft structure, automatic temperature measuring Device and electrical heating.

2. Catch wheel: including two kinds mechanical wheel and hydraulic pressure.

3. Gears: single or double. Control the rotating speed by variable motor, DE Machine and frequency variable motor. Be reliable, energy saving, and Efficient.

4. Cylinder tyre bolster: lower bolster has three types: fixed, zoom and floating. the structure is simple, replacement is convenient and won't hurt cylinder.

5. Sealing equipment: there are many kinds for choice according to kiln models, Including air cylinder edge sealing, spring edge sealing, and graphite block Sealing and combination for above. The feather is adaptive for cylinder Rotating and swing. and sealing effect is very good.

6. Kiln head hood: including stationary type and flexible type.

 

 

 

Working principle of Lime rotary kiln:

Rotary Kiln is usually working as following: the kiln is a cylindrical vessel, Inclined slightly to the horizontal, which is rotated slowly about its axis. the raw material to be processed is fed into the upper end of the cylinder. while the kiln rotates, material gradually goes down towards the lower bottom, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). the hot gases may be Generated in an external furnace, or may be generated by a flame inside the Kiln. Such a flame is projected from a burner-pipe (or " firing pipe" ) which Acts like a large bunsen burner. the fuel for this may be gas, oil or Pulverized coal.

 

 

Rotary Kiln Specifications:

spec (m)	Technical parametere			Speed reducer	motor		Supporting quantity
	rev (r/min)	slope (%)	Output (t/h)	type	type	power (KW)
1.6X32	0.58~2.85	4	2	ZQ75-50	YCT250-4A	18.5	3
1.6/1.9X36	0.53~1.59	4	2.5~3	ZQ110-7	YCT250-4B	22	3
1.9X39	0.53~1.59	4	3~3.4	ZQ125-7	YCT315-4A	37	3
2.2X45	0.214~1.64	3.5	4~5	Main:ZS125-5	YCT315-4B	45	3
				Auxiliary:ZQ40-40	Y112M-4	4
2.5X50	0.62~1.5	3.5	5~6	Main:ZS165-5	YCT355-4A	55	3
				Auxiliary:ZS50-1	Y160M-6	7.5
2.5X55	0.62~1.5	3.5	5~6	Main:ZS165-5	YCT355-4A	55	3
				Auxiliary:ZS50-1	Y160M-6	7.5
2.8X55	0.62~1.5	3.5	6~7	Main:ZS165-6	YCT355-4B	75	3
				Auxiliary:ZS50-1	Y160L-6	11
3.0X60	0.5~1.5	3.5	7~9	Main:ZS165-3	ZSN-280-11B	125	4
				Auxiliary:ZS50-1	Y160L-6	11
3.2X64	0.4~1.5	3.5	8~10	Main:ZL130-16	ZSN-280-11B	190	4
				Auxiliary:ZL50-10	Y180L-4	22
3.5X70	0.4~1.5	3.5	12~14	Main:ZSY500-40	ZSN-315-082	280	4
				Auxiliary:ZL50-14	Y180L-4	22
4X80	0.4~1.5	3.5	16~20	Main:ZSY630-35.5	ZSN-315-12	355	4
				Auxiliary:ZSY280-35.5	Y200L-4	30

 

 Our Services

1. Pre-sale services: enthusiasm

We Provide you with the prophase plan, process flow design and manufacturer Equipment

According to your special demand.

2. Sale services: servant

Send Technicians to the jobsite for guiding the installation and adjustment, Training operators

and Finishing the check and accept together with you.

3. after-sale services: faithfulness

to Establish long term friendship, we will regularly pay return visit to Customers.

in Addition, we provide one-year warrantee to make sure your machine runs Consistently. We always keep certain inventory level of spare parts, which Means the replacements can be shipped to you right away.

 

 

Company Information

Henan Zhengzhou Mining Machinery Co., Ltd. Established in 1956 and located in Xingyang of Zhengzhou City of Henan Province, specially produces metallurgical Machinery. It covers an area of more than 60000 m and various building area of 35000 m. In the plant, there are workshops of cast iron, cast steel, forging, Heavy machine tool processing, rivet welding and heat treatment etc. Its Perfect and complete equipment, advanced detection means, strong technical Force establish good foundation for the reliable production.

the Main products of company include: ball mill, rotary kiln, vertical preheater, Cooler, crusher, metallurgical coke oven, magnetic separator, flotation Machine, classifier, feeder, bucket elevator, preheater, dust collector, Elevator, drier, and other equipments relate to metallurgy, cement, lime, Mineral processing, refractory, chemical industry. The products of Henan Zhengzhou Mining Machinery Co., Ltd have been sold to every province of China and exported to Russia, Korea, Vietnam, Malaysia, Nepal, Bangladesh, Mexico, Armenia, Africa, South America and other countries and regions.

 

 

 

If you are interested In the products of our company, please contact us to get the quote.