Application: | RF |
---|---|
Insulation Material: | PVC |
Conductor Material: | Copper |
Brand Name: | Zhengkai |
Model Number: | N-H-J1/2Sa/7/16-H-J1/2Sa-3m |
Place of Origin: | China (Mainland) |
PIM3: | less than -155dBc |
VSWR: | less than 1.12@3GHz |
Plating of body: | Tri-alloy/Ni |
Plating of PIN: | Ag |
Impedance: | 50Ohm |
Assembly method: | solder type |
Durability: | about 500 times |
Quick Details
Specifications
Jumper Cable RF-Combination connectors of different connector series can be assembled as either straight or angle versions by using the corresponding clamps.with only one combination connector and the different cable clamps,a variety of connectors can be produced allowing a reduction in stock-levels.The technical specifications can be obtained from the descriptions in the respective chapters for each series.
Note: connector and cable type,length an be changed based on customer's requirements.
According to |
IEC60169-4 | ||
Electrical | |||
1 |
Characteristic Impedance |
50ohm | |
2 |
Frequency Range |
DC-3GHz | |
3 |
VSWR |
Less than 1.15 | |
4 |
Dielectric withstanding voltage |
2000RMS,50Hz,at sea level | |
5 |
Dielectric Resistance |
5000M | |
7 |
PIM3 |
-155dBc | |
Mechanical | |||
1 |
Durability |
Mating cycles 500 | |
Material and plating | |||
|
Description |
Material |
Plating |
1 |
Body |
Brass |
Tri-alloy |
2 |
Insulator |
PTFE |
|
3 |
Center conductor |
Brass |
Ag |
Environmental | |||
1 |
Temperature Range |
-40~+85 | |
Inspection | |||
1.CNC machines,advanced test equipment 2.All products are suit for ROHS. 3.ISO14001 certificate,ISO9001 certificate |