Diamond inserts pcd wholesale

Type:

BN700 BN600 BN500 BN100 BNX10 BNX20 BN250 BN300

AMB90 DBC50 DBW85 SB90

SB95 SB100 BZN9100 BZNHTC 2100 BZN6000

Dimensions (mm) diameter Thickness

Diameter641.6/2.0/3.2

Diameter944.78

Diameter741.6/2.38/3.2

Diameter741.6/2.0/3.2

Diameter601.6/2.0/3.2

Diameter603.18/4.76

Diameter581.6/3.2

Product description

Mores PCD cutting tool blanks (58mm) are produced by sintering selected diamond particles at ultra-high pressure and high temperature, and consist of a diamond layer or a tungsten carbide substrate. Our PCD discs can be cut freely into tips by both laser cutting and EDM cutting, which are widely used for woodworking and metalworking tools due to their longer working lives and higher efficiencies. Also, our company is capable of supplying PCD cutting tool tips in various shapes and different sizes in according to your drawings, cut either by laser or EDM wire.

Applicification:

PCD BLANKS is widely used for machining non-ferrous metals and alloys, such as aluminum, copper, aluminum/gray iron composites, as well nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber, ect., where high abrasion resistance and good surface finish are required.

Advantages of PCD tool blanks:

the blank has the advantages of high hardness, high thermo stability, high chemical stability, good strength and weld ability.The working life of a PCD cutting edge is usually 50 to 250 times longer than that of traditional sintered carbide cutting tools.

1. Long working life.

2. Uniform surface finish.

3. Reduces machine down time.

4. Highly improved workpiece quality and excellent dimensional control.

5. Increase productivity.

6. High material removal rate.

7. Lower cost per piece.