FANN Model 35 Viscometer  R-1 30847  207523

INFO
PMZTECHNOLOGY
COM

Q Q  1787508885

 
Viscometer Model 35 Accessories
Fann offers a complete line of accessories for the Model 35 Viscometer.
Thermo-cups
Thermo-cupElectrically heated sample cups incorporate a precision thermostat for close temperature control.  Operating temperatures up to 200F (93C) are reached quickly and verified by an included dial thermometer.  Pins in the base locate and lock to the stage of Model 35 Viscometers.  Made of epoxy-finished aluminum alloy for better heat distribution and easy cleaning.
Part No. 101558383 Thermo-cup, 115 VAC 50/60 Hz, 2 Amps
Part No. 101558384 Thermo-cup, 230 VAC 50/60 Hz, 1 Amp
Model DW-3 Calibration Check Kit
DW3 Calibration KitDead Weight calibration checks help maintain the accuracy of the torque measuring system on all Model 35 Viscometers.  Quickly determine the condition of bearings and the accuracy of torsion spring setting.  Kit includes support bracket, spool for bob-shaft, 5 metric weights, spare thread, instructions, and case.
Part No. 207853 Model DW-3 Calibration Check Kit
Fluid Calibration Check Kit
Check KitThis check kit is designed for checking the calibration of the Model 35 Viscometer or any rheological instrument.  the kit contains certified viscosity standard fluids (NIST certified) in containers labeled with certification numbers and including temperature/viscosity tables.  Kit contains all required containers, thermometer, and instructions for easily determining the accuracy of any viscosity measuring instrument to centipoise in the 20-27C range, and 1 centipoise in the 100-300F temperature range.
Part No. 207026 Fluid Calibration Check Kit
Certified Viscosity Standard Fluids
Silicone fluids are the most commonly used standard for verifying calibration of Fann Viscometers and Rheometers. Silicone Standards are Newtonian fluids which are accurate to 1% of viscosity value. Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards. Fann Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). the selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 16 oz (1 pint) containers complete with a certificate of calibration and a temperature/viscosity table.
Part No. 207124 - Certified Calibration Fluid   10 Centipoise (cP)
Part No. 207119 - Certified Calibration Fluid   20 Centipoise (cP) 
Part No. 207120 - Certified Calibration Fluid   50 Centipoise (cP) 
Part No. 207121 - Certified Calibration Fluid   100 Centipoise (cP)
Part No. 207122 - Certified Calibration Fluid   200 Centipoise (cP)
Part No. 207123 - Certified Calibration Fluid   500 Centipoise (cP)
Part No. 207126 - Certified Calibration Fluid   30,000 Centipoise (cP) 
Part No. 207125 - Certified Calibration Fluid   100,000 Centipoise (cP)
 Torsion Spring AssemblyPart NumberTorsion Spring Constant k1 
(dyne-cm/deg. Defl) F Factor Maximum Shear Stress with B1 Bob (dynes/cm2)Color Code
F0.220765677.20.2307Green
F0.52076571930.5766Yellow
F120746538611,533Blue
F220765877223,066Red
F32076591,15834,600Purple
F42076601,54446,132White
F52076611,93057,665Black
F102076623,8601015,330Orange
Part No. 207523 R1 Rotor Open Bottom
Part No. 207942 R2 Rotor Open Bottom
Part No. 207943 R3 Rotor Open Bottom
Part No. 208983 R1 Rotor Closed End 
Part No. 208985 R2 Rotor Closed End
Part No. 207521 B1 Bob, Hollow, Stainless Steel
Part No. 207520 B2 Bob, Solid, Stainless Steel
Part No. 207519 B3 Bob, Solid, Stainless Steel
Part No. 207518 B4 Bob, Solid, Stainless Steel
Part No. 101450793 - Yield Stress Adapter
Part No. 206088 - Power Inverter