Application

Regional LPZ 2-3 for lightning or higher interface area, generally used for a variety of low-voltage, single phase, fine third of DC electronic devices (D) overvoltage protection
Products Type
TPS D10-12V TPS D10-24V  TPS D10-48V TPS D10-60V  TPS D10-120V TPS D10-230V

TPS D10 Series modular low-voltage power surge protector is a single module, rail-mounted terminal device level (tertiary classification test) surge absorption protection, suitable for single or multi-phase low voltage power supply options, easy installation, simple . Built-in protection circuit, the gas discharge tube and varistor structure, and is an overheating cut-off device monitoring. In the protection circuit suffered greatly over frequent power surges or overloaded, the cutting device will overheat protection circuit with the grid separation, so that the grid is not affected; Meanwhile, the red LED warning lights, prompting the user to protect the circuit has expired, protector installation lose its protective role in the downstream electronic equipment, the user must replace the protector immediately. Protection also has a green LED lights, indicating the power call. Disconnect contacts with remote signaling alarm device, as an additional optional feature, available on user requirements.
Product Features:
1 through flow, residual voltage, fast response, no freewheeling
2 Built-in thermal tripping device, so protection from overheating, breakdown failure can automatically disconnect
3 standard 35mm rail mounting modular design, very easy to install and maintain
4 There continue to detect the working status indicator, red LED when the circuit failure warning lights, green LED lights indicate working status
5 LN-PE full protection mode is more secure, small space
   
                                 
                                                                                                    

Products size
 

 

Type		TPS D10-12V	TPS D10-24V	TPS D10-48V	TPS D10-60V	TPS D10-120V	TPS D10-230V
Item no.		20041	20042	20043	20044	20045	20046
Nominal Voltage	Um	12V	24V	48V	60V	120V	230V
Max.operation voltage	Uc	21V-/15V~	42V-/30V	84V-/60V~	106V-/75V	212V-/150V	360V-/255V
Nominal current	IL	16A	16A	16A	16A	16A	16A
Nominal discharge current(8/20)	In	1kA	1kA	3kA	3kA	3kA	3.5kA
Max.discharge current(8/20)	Imax	2kA	2kA	6.5kA	6.5kA	6.5kA	7kA
Voltage protect level	Up	70V	70V	70V	70V	70V	70V
Responce Time	<25nS
Operating temperature	T	- 40 + 80
Faulty indicator		Red
Remote signaling contact		Option
Protect level		IP20
Installation		35mmElectrical installation guide to install a standard module width, 35mmDIN-rail, 1 modulo number

 

Applications
Fine surge protection devices can be used as the power section of the terminal equipment can be used for lightning regional LPZ2-3 or higher interfacial area, widely used in computers, modems, ripple control equipment, industrial control systems and measurement systems, protecting them from the lightning or over-voltage surge caused damage to the switching operation. Selected according to the specific choice of system voltage corresponding products, 12V, 24V, 48V, 60V, 120V, 230V voltage optional six. Comprehensive surge protection, you also need to install the Class B and Class C lightning over-voltage protection.
 
Product Installation
Usually installed in front of the equipment, the power phase line L, N, respectively, the zero line surge protector corresponding access terminals to ensure secure and reliable, because the built-in thermal cut-off device, no need to pre-empty open or fuses, while the electric surge protector ground and ground to make a good electrical connection.
 
Product Maintenance
Surge protectors should regularly check the work, the protection circuit suffered greatly over frequent power surges or overloaded, the cutting device will overheat protection circuit with the grid separation, so that the grid is not affected; while red LED warning lights, prompting the user to protect the circuit lapsed protection for electronic equipment installed in the downstream loses its protective effect, the user must be replaced immediately protector.

Order information

Serial	Order	Type	Description
1	20041	TPS-D10-12V	12V single phase low-voltage power protect,Imax:2KA,Un:12V-/,Up:70V
2	20042	TPS-D10-24V	24V single phase low-voltage power protect,Imax:2KA,Un:24V-/,Up:140V
3	20043	TPS-D10-48V	48V single phase low-voltage power protect,Imax:6.5KA,Un:48V-/,Up:260V
4	20044	TPS-D10-60V	60V single phase low-voltage power protect,Imax:6.5KA,Un:60V-/,Up:350V
5	20045	TPS-D10-120V	120V single phase low-voltage power protect,Imax:6.5KA,Un:120V-/,Up:650V
6	20046	TPS-D10-230V	230V single phase low-voltage power protect,Imax:7KA,Un:230V-/,Up:1000V