| Brand Name: | G-PENNY MACHINE |
|---|---|
| Maximum Torque: | 0.51Nm |
| Drive: | Motor |
| Model Number: | 1.5kw Water cooled Spindle kit |
| Operating Speed: | 0-24000rpm |
| Application: | Milling |
| Size: | 80x188mm (80mm diameter) |
| Voltage: | 220v |
| Current: | 7A |
| Power: | 1.5kw (1HP=735w) |
| Cooling: | Water cooled |
| Bearing Type: | 2x 7002C P4 DT & 2x 7002C P4 DT |
| Collet: | ER11 |
| Frequency: | 400Hz |
| Collet Range: | 1-7mm (Including 1/8,1/4 ) |
| Spindle Bracket: | 80mm |
| Unit Type: | Set |
| Package Size: | 35cm x 20cm x 30cm (13.78in x 7.87in x 11.81in) |
| Package Weight: | 7.1kg (15.65lb.) |
Quick Details
Specifications
1 & 1.5kw 220v ER11 water cooled spindle 80x188mm 4 bearings
1 & 80mm Spindle Clamp
Spindle:
Basic parameters:
-
Size: 80x188mm (Middle body diameter:80mmxLength:188mm)
-
Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
-
Cooling: Water cooling
-
Power Interface: Optional H20-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. (Pay attention! our spindle "4" connecting to GND,promised personal safety!!)
-
Power: 1.5kw (1HP=0.735kw)
-
Voltage: 220vAC
-
Frequency: 0-400Hz
-
Speed: 0-24000rpm
-
Runout Off: 0.01mm
-
Bearing Type: 2×7002C P4 DT & 2×7002C P4 DT
-
4 pcs Fully enclosed angular contact bearings
-
Collet: ER11
-
Clip Knifediameter: 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
-
Grease Lubrication
-
Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board (ABS) and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)
Advantage:
-
P4 angular contact bearings ,2×7002C P4 DT & 2×7002C P4 DT,increase spindle life.
-
Longer length make the torque bigger,more powerful.
-
Carefull assembly make the spindle more precisional.
-
Precision 0.01mm.Coaxial degree less than 0.0025mm
-
Shipment within 4 days,promise the delivery time.
-
We are the spindle manufacturer,we offer only best quality and best price to you.
Drawing Pictures:
Preparations before use
-
Spindle working environment temperature is usually -10 ~ 40 . -
Before installing the first electric spindle axis head turned by hand, should feel flexible, non-blocking phenomenon.
Use correctly
-
Spindle in the preservation and transportation, high-speed grease inside the bearing state will change, customers should be running at low speed for 30 minutes. 3000 rpm and then follow the poor increase, run 20 minutes each. Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter.
-
Connect the inverter spindle, three-phase inverter power cord should be soldered in the plug 1 (U), 2 (V), 3 (W) feet, 4 feet for the ground. After the power is turned on, to observe whether the spindle rotation axis indicates the direction consistent. If inconsistency should be immediately shut down, replace the inverter and spindle connected two wires of three-phase power supply.
-
It should ensure that before use of water-cooled spindle, the cooling system is working properly. Every day before using the spindle must be running at low speed for 15-20 minutes. Clamping the cutters to spindle, collet nuts ,collets,cutters must be clean enough. Shank inserted into the collet must be greater than 15mm.
Care and maintenance:
-
Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken.
-
AC spindle motor MUST use with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.
-
When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings.
Water-cooled spindle and air-cooled spindle differences:
-
1. Cooling in different ways: water-cooled spindle motor is the use of the water cycle to cool the heat generated after the high-speed rotating spindle, spindle motor with fan-cooled approach to cooling.
-
2. Noise: Water-cooled spindle motor is basically no noise, but the air-cooled spindle motor is very loud.
-
3. Life aspects: Water-cooled spindle motor pay attention to maintenance, frequently changes the water or the use of industrial water coolers, air-cooled spindle fan mainly by the wind blowing the heat transferred to the heat sink, so as to achieve the cooling effect.
-
4.If you need use for metal ,hard wood,granite,stone,you can choose metal spindle.Metal spindle much better than wood spindle.
Cast Aluminium Bracket:
Diameter:
80mm
Material: Cast Aluminium
Features:
-
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
-
Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth,.
-
Cast aluminium fixture is much heavier than aluminium profile fixture.
Product Description:
-
Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.
Usage:
-
Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.
If you don't know how to set up the inverter or connect the spindle to inverter,please contact us. We will help you to set up it.
Customer product display
Spindle engraving products show
Spindle production process
- Spindle from the production - assembly - test, and finally the perfect packaging .
- We will 100% guarantee security to the hands of the guests.
Shipping Cost
Our products are sold worldwide.
If you need many items in the same time, please contact us in advance to confirm shipping cost.
Payment:
We accept paypal credit, bank transfer, western union etc.
Payment must be made within 7days calendar days of the auction end time.
Problem and Feedback:
PLEASE DON'T leave any negative feedback before you contact us.
We are honest and helpful supplier , we will try our best to solve problems with you.
Your satisfaction is very important for our store, so please contact us before you want to leave a negative feedback.
Thanks very much in advance.
Refund:
If you are NOT SATISFIED with our package like the products is damage, please do not sign it and contact us immediately.
If it is possible, please take some photos or make a small video about it. It will help us to solve the problems.
Note:
We can produce the product according to our customer's design.
If you need something is very special, please contact us about it.
We are willing to help you about it.