Product Main

Quick Details

Item Type: Laser Flashlight
Model Number: DIY Kit 6N3 Tube
Brand Name: Q-BAIHE
Unit Type: piece
Package Size: 15cm x 10cm x 5cm (5.91in x 3.94in x 1.97in)
Package Weight: 0.25kg (0.55lb.)

Specifications

 

JSDZ DIY Kit 6N3 Tube Buffer Amp Audio PreAmp 

Note:The board marked 8 x470 uf, 1 x2200 uf, 1 x220 uf, but the 470 uf and 220 uf could replace each other.We send 470 uf and 220 uf capacitance  randomly,you may receive 9 pieces 470uf capacitance.If you have any questions  of this,please contact us!We would help you!

Feature:

The buffer will 6N3 tube horizontal mountingespecially for low chassis installation, power requirements are very simple and requires only a single 12V / 10W transformerrose through the onboard screen very needed boost line voltageFollowed by good audio input , and an audio output cable can work!

The buffer sophisticated materials, PCB solder black using advanced dual-panel, input and output coupling capacitors chosen selection of original Philips BC400V2U2 boost capacitor units produced LELON Lvpao 220UF / 50V electrolyticinput and output terminals using strong solid metal RCA, this buffer layout is reasonable, nice shape, is your upgradeinstalled the best choice!

Kit Installation Note: Resistance PCB board is not markedplease install the following

12k       R1,R2
470R    R3,R4
470K    R5,R6

 

Usage: audio source -The buffer -PA

Buffer tube preamp is actually a gall bladderbut it's slightly less than one magnification, which is not

Amplification, the gain is approximately equal to 0dB.

It can act as a better impedance matching (to improve the input impedance and reduce the output impedance of the driver stage the better)

Tube buffer can effectively filter out the residual digital audio signal, so warm and mellowsoft Naiting!

You can also replace their more common following the same model tube: 6DJ8,6922, ECC88,6H23 so on.

Input impedance: 500K Ohm

Output impedance:> 10K Ohm

Input Sensitivity: 200mV

Gain: 0dB

Frequency response: 10Hz-40KHz +/- 0.5dB

Total Harmonic Distortion:0.005%

Signal to noise ratio:> 100dB 

Input: RCA × 1 group

Output: RCA × 1 group

Dimension: 134mm × 89mm × 35mm high

Weight: 180g

Other substitution of the same model can pipe: 6922 / 6DJ8 / ECC88 / E88CC / 6H23 ...

 

Package List:

1X JSDZ DIY Kit 6N3 Tube Buffer Amp Audio PreAmp