Infrared Electric Heating Film Specification Data:

Power supply	230VAC, 50Hz	IP Grade	IP54
Compression strength	2750V	Tensile strength	0.15mp/cm2
Insulation grade:	B1	Ambient temperature	-40~+90Centigrade
Radiance	75%~85%	Oxygen index	>31%
Thickness	0.25mm	Wavelength of radiation	8~15μm
The max breakdown voltage	10,000V	Melting temperature	110Centigrade
Flame retardant rating	UL94VO	Infrared energy	756.9K/Square meter
Adhesive strength	8.0kg/cm2	The max surface temperature	73 Centigrade

 

 Infrared Electric Heating Film Size:

Item No	Width (mm)	Thickness (mm)	Length (m/roll)	Weight (Kg)	Electric Consumption (Watt/m)
TF-705	500	0.25	2	0.6	110W

 

Power consumption of heating film:
1,Electric film rated power is 220W/Square meter.
2,Means full loading: 0.2 kWh.
3,Installed electric film heating system, are relying thermostat control,
intermittent work to make the room temperature is maintained constant.
4,When the room reaches the set temperature,
the system will enter standby mode.

5,Only 150W power per square meter!!
6,Paved area of 70% of the room can achieve heating requirements.
7,According to the test, when the outdoor temperature is -6 degrees Celsius,
the indoor temperature want to maintain at 20 degrees Celsius,
under the control of the thermostat,
electric film per day per square meter of actual working time is 4-8 hours.
8,Daily consumption per square meter is about 0.9 kWh.

Saving essentials:
(1) An electrical heating system of the room to do better warm insulation,
electric film actual working time will be shorter,
thereby reducing power consumption.
It is more convenient than the boiler and more environmentally friendly.

(2) Install thermostats in each room, separate control.
Close heating system when no body in the room,
thereby reducing the working area, to save power.
It is the same principle with central air condition, but more comfortable


Packing
1 pcs Heating film