Practical XD-609 4 Mode On/Off Touch Switch Sensor For 220V LED Lamp --M25

Description:

Specification:
Note:
This touch switch applies to the lamp with metal body.For example, furniture cabinet
light, lamp in front of sanitary,desk lamp,floor lamp,bedlamp and other electrical
equipment.
Darkness,Touch The Light Body,You Can Easily Switch On Or Off And Adjust The
Brightness.
How To Connect:
1.The Red Line Is Connected With The 220V Input Positive Wire.
2.The Black Line Connect To Negative 220V Input Wire.
3.the other black and blue lines connected to the lamp,
4.the yellow line is the touch signal lines.
This touch switch applies to the lamp with metal body,and the lamp-house comes from
the L1.77x0.44ED Lamps,when the human touch the any parts of the metal lamp body,it
will meet the following requirement:(3 levels: low,medium,high and then off):
A. touch one time: the lamp will be in low light;
B. touch again: the lamp will be in medium light;
C. touch one more time: the lamp will be in high light;
D. touch again: the lamp will be off.
Operating Voltage: 120V/240V ±10%50/60HZ (can not be used on 110V)
Load Power: 5-200W
The Wire Length:Approx 12CM
Size: 60*43*22mm
Remark: the switch can only be connected with the incandescent lamp (ordinary bulb), and can not be connected with other lamp.

Package Includes:

1 x On/Off Touch Switch