| Item Type: | Switches |
|---|---|
| Remote Distance: | 0-500M |
| Certification: | CCC |
| Switch Type: | Remote Control |
| Warranty: | new |
| Unit Type: | Set |
| Package Size: | 25cm x 15cm x 10cm (9.84in x 5.91in x 3.94in) |
| Package Weight: | 1.0kg (2.20lb.) |
Quick Details
Specifications
220V 1CH Radio Wireless Remote Control Switch 8 Receiver&2 transmitter Learning Code light lamp LED ON OFF Output Adjusted mini
We default send 315Mhz, if you need 433Mhz pls feel free to contact with seller
Specification:
1.Transmitter
Operating Voltage: DC12V
Operating Current: 30MA
Operating Frequency: 315 MHz/433MHZ (Default 315 MHz)
Frequency Distance: 50-200m
(please notice that is the ideal distance without any block and signal interfere , it would rise and
fall about 10%-50% with the block and signal interference ).
Encode: Fixed code, Soldering
2.Receiver
Channel: 1CH
Decode: Learning code
Working Voltage: AC 220V (180V-240V)
Output way: Momentary Toggle Latched Adjustable
Maximum Load Current: 10A
Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
Receiver Sensitivity: -105dBm
Working temperature : -40\'C - +80\'C
Size : 55*30*18mm
Output way : Jog .Inter-lock .Self -lock is Adjustable
Working/output way:
Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is
Stop/OFF. One channel switch need one buttons remote control.
Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again
is stop/OFF. One channel switch need one buttons remote control.
Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel
switch need 2 buttons remote control.
Learning and removing method:
1 .There is a learning button on the control panel of touch switch, the button is used to learn and
remove the code.
2 .Press and hold the learning button for three seconds.When the indicator light flashes ,we enter
the learning state. Press any key on the remote controller to emit signal, the light flashes two
times and off .It means you learn it successfully.
3 .It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote
controller.
4. Delete remote control method: hold down the learning button for about 8 seconds, the indicator
light turns on to off, then the code you learned before will be deleted.
Please notice that :
Here is the 8*1CH receiver and 2*8 buttons remote control. You can choose the all the working way
that you can choose, you have better choose the Jog or self-lock, so all the buttons has been used .
Please tell us what output state do you want after placing the order, or we will ship to you as
default "Momentary (jog)". It can be changed by Welding Spot by Soldering.
Packing list:
8 x Receiver
2 x Transmitter (Battery not include)