Made of high quality cold roll sheet copper and anti-high temperature permanent magnet, Leadshine's stepper motors are highly reliable and generate low motor heating. Because of their nice internal damping characteristics, those stepping motors can run very smoothly and have no obvious resonance area within the whole speed ranges.The 573S15 three-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 6 motor leads, the motor can be connected in delta connection.
1. 3 phase 1.2 degree stepping angle.
2. Standard NEMA 23 dimensions.
3. Holding toque of 1.5 N*m (212 oz-in).
4. High precision.
5. Smooth movement.
6. Low motor heating.
7. Low movement noise.
General Specifications
|
Step Angle Degreen
|
1.2 degree
|
|
Step Angle Accuracy
|
plus or minus 5%(full step,no load)
|
|
Temperature Rise
|
80 centigrade Max
|
|
Ambient Temperature
|
-10 centigrade --+50 centigrade
|
|
Insulation Resistance
|
100M ohms min.500VDC
|
|
Dielectric Strength
|
500VAC for one minute
|
|
Shaft Radial Play
|
0.06 Max.(450g-load)
|
|
Shaft Axial Play
|
0.08 max.(450g-load)
|
Electrical Specifications
|
Model Number
|
Step Angle(degree)
|
Holding Torque (N.m)
|
Current /phase(A)
|
Inductance /phase(mH)
|
Resistance /phase (Ohm)
|
Number of Leads
|
Rotor Inertia(g.cm^2)
|
Detent Torque (N.cm)
|
Weight Oz (kg)
|
|
573S15
|
1.2
|
1.3
|
5.8
|
1.35
|
0.7
|
6
|
400 |
6.8 |
1.0
|
