CNC 4Nm 572oz-in 2phase Closed-loop NEMA 34 Stepper Motor Drive Kit with 48v Power Supply for CNC Router

Hybrid Servo Drive HBS86

Descriptions

The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system.

Electrical Specifications

Parameter	Min	Typical	Max	Unit
Input Voltage	30	48	80	VDC
Output Current	0	-	8.2(Peak)	A
Pulse Input Frequency	0	-	200	kHz
Logic Signal Current	7	10	16	mA
Isolation Resistance	500	-	-	MΩ

Applications

The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. Its great feature of fast response and no hunting make it ideal for applications such as bonding and vision systems in which rapid motions with a short distance are required and hunting would be a problem. And it is ideal for applications where the equipment uses a belt-drive mechanism or otherwise has low rigidity and you don't want it to vibrate when stopping.

Hybrid Servo Motor 86HBM40-1000

Made of high quality cold roll sheet copper and anti-high temperature permanent magnet, Leadshine's stepper motors are highly reliable and generate low motor heating. Because of their nice internal damping characteristics, those stepping motors can run very smoothly and have no obvious resonance area within the whole speed ranges.

Specification

Phase: 2 phase

Series: 86HBM Series

Step Angle: 1.8 degree

Frame: NEMA 34 86mm size

Holding torque: 4.0N.m 572 oz-in

Encoder: integrated 1,000-line incremental encoder

Feature: high precision, very low noise & heating

Power Supply S-350-48 Specification:

Model	S-350-48
DC output voltage	48V
Output voltage	±1%
Rated output current	7.3A
Output current range	0~7.3A
Wave and noise	240mVp-p
Inlet stability	±0.5%
Load stability	±0.5%
DC output power	350.4W
Efficiency	83%