| Type: | Hybrid |
|---|---|
| Certification: | CCC |
| Phase: | 2 |
| Current / Phase: | 6A |
| Step Angle(degrees): | 1.8 |
| Holding Torque: | 6.5N.m |
| Brand Name: | ToAuto |
| Model Number: | 1 Axis 86HS9860B4J Kit |
| Unit Type: | Set |
| Package Size: | 20cm x 20cm x 20cm (7.87in x 7.87in x 7.87in) |
| Package Weight: | 5.8kg (12.79lb.) |
Quick Details
Specifications
1 Axis Nema34 6.5Nm 928oz-in Dual Shaft Stepper Motor Drive Kit with Power Supply+5 Axis CNC Breakout Board
Packing list:
1pcs Nema34 6.5Nm Stepper motor Dual shaft 86HS9860B4J with one keyway shaft and flat shaft
1pcs stepper drive MA860H 18-80VAC 7.8A
1pcs power supply 400w 60V 6.6A S-400-60
1pc 5 axis CNC breakout board & cable SA-084+DB25 (for free)
Stepper motor Specification
| Model |
86HS9860B4J |
86HS15060B4J |
| Step Angle |
1.8 Degree |
1.8 Degree |
| Dual Shaft Diameter |
14mm |
14mm |
| Shaft length |
37mm (keyway shaft) ,20mm (flat shaft) |
|
| Rated Current |
6A |
6A |
| Phase Resistance |
0.33 ohms |
0.5 ohms |
| Phase Inductance |
2.4mH |
5.2mH |
| Holding Torque |
6.5Nm |
12Nm |
| Detent Torque |
9.5 N.cm |
24.5N.cm |
| Rotor Inertia |
1550 g.cm2 |
2500 g.cm2 |
| Motor Length |
98mm |
150mm |
| Lead wire(No.) |
4 |
4 |
| Step Angle Accuracy |
±5%(full step, no load) |
±5%(full step, no load) |
| Resistance Accuracy |
±10% |
±10% |
| Inductance Accuracy |
±20% |
±20% |
| Temperature Rise |
80 Degrees Celsius Max |
80 Degrees Celsius Max |
| Ambient Temperature |
-20°C~+50°C |
-20°C~+50°C |
| Insulation Resistance |
100MΩ Min.500V DC |
100MΩ Min.500V DC |
| Dielectric Strength |
500V AC for one minute |
500V AC for one minute |
| Warranty |
One year |
One year |
Dimension
Stepper motor drive MA860H
| Model |
MA860H |
|||
| Type |
2Phase 256 Micro-step Driver |
|||
|
Advantage |
High performance, low price Automatic half flow function The highest dynamic 256microstep Photoelectric isolation signal input Motor noise optimization function Bipolar constant current chopping mode Chopper frequency up to 100 KHZ Exquisite shape, ease of installation |
|||
| Item |
Min |
Typical |
Max |
Unit |
| Input voltage |
24 |
- |
110 |
VDC |
| 18 |
|
80 |
VAC |
|
| Average output current |
2 |
2.5 |
7.8 |
A |
| Logic input current |
6 |
15 |
30 |
mA |
| Impulse response frequency |
- |
- |
100 |
KHZ |
| Pulse low level |
5 |
- |
1 |
μS |
Switching Power supply
| Model |
S-400-60 |
| AC Input |
100-120VAC/7.0A 200-245VAC/4.5A 50/60Hz |
| DC Output |
60VDC 6.6A |
5 axis CNC Breakout Board
| Mach3 Software |
Win XP |
|
System
|
High performance, cost-effective |
| Maximum support 5-axis stepper motor driver controllers |
|
| Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software |
|
| USB power supply and peripherals powered phase are separated to protect computer security |
|
| All the signals are opto-isolated which can protect your computer security |
|
| 5-input interface to define the Limit, Emergence-Stop, Cutter alignment etc |
|
| Wide input voltage range: 12-24V, and with anti-reverse function |
|
| One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc |
|
| Output 0-10V analog voltage for inverter to control the spindle speed |
Wiring System
Product Photos:
