CNC Single Axis 2 Phase TB6600 Hybrid Stepper Motor Driver 0.2A ~ 5A DC 12 ~ 48V

CNC Single Axis Two Phase TB6600 Hybrid Stepper Motor Driver 0.2A ~ 5A DC 12 ~ 48V #SM576 @CF


HY-DIV268N-5A subdivision-type two-phase hybrid stepping motor drive use DC 12 ~ 48V power supply.
It is suitable for driving two-phase hybrid stepping motor, whose dynamic voltage is 12 to 48V,
the current is less than 5A and the outer diameter 35~86 mm. This drive use the drive's current loop subdivision control,
the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise.
High-speed torque is much higher than other two-phase drive, high positioning accuracy.
It is used widely for the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.

 
Features:
1) Average current control, two-phase sinusoidal current drive output;
2) DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator;
3) Optically isolated signal input / output;
4) Overvoltage, undervoltage, overcurrent, and white short-circuit protection;
5) 4 file segmentation and automatic half-streaming capabilities up to 16 segments;
6) File output phase current settings;
7) High starting speed;
8) High-speed torque;

 
Electrical Parameters:
- Input voltage DC 12 ~ 48V input;
- The input current of 1 to 5 amps, select the drive a stepper motor;
- Output current of 0.2A ~ 5A;
- Temperature Operating Temperature -10 to 45 Celsius; Storage temperature -40  to 70 Celsius;
- Humidity not condensing, not drops;
- Gas prohibit combustible gas and conductive dust
- Weight: 200 grams