| Type: | Hybrid |
|---|---|
| Phase: | 2 |
| Certification: | CE |
| Unit Type: | piece |
| Package Size: | 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in) |
| Package Weight: | 2.5kg (5.51lb.) |
Quick Details
Specifications
Quick Details
Place of Origin: Guangdong, China (Mainland) Brand Name: Xfoyo
Model Number: FY86EX322A Phase: 2
Type: Hybrid Certification: CE
Step Angle(degrees): 1.8degree Holding Torque: 4.0
Current / Phase: 3.2A Rated current: 3.2A
Resistance: 1.2 Inductance: ±20%(1KHZ)
Moment of inertia: 1300 Weight: 1.8
Lead line number: 8 Stepper angle: 1.8℃
stepper angle accuracy: ± 5%(whole step) Resistance accuracy: ±10%(20℃)
holding torque: 3.5
Note:
1.Above form is only a representative product, can be produced in accordance with the requirements.
2. Customized the electrical parameters of the motor, winding specifications, the size of the shaft shape according to your requirements
3 .The standard products is 8 line motor which the steps angle is 1.8 degrees. We can provide 4 lines and 6 lines motor and the stepping angle is 0.9 degrees for choices in customer’s requirements.
4 . We can follow your requirements to match the power off brake, square type gear box or planetary gear reducer.
Appearance and Installation dimensions
Length of line is 500±10mm
Instructions of Motor output shaft mode
The output diameter is optional : Φ12mm ,Φ12.7 mm,Φ14 mm
The output shaft type is optional: N is circular optical axis, P is milling flat platform, J is keyseat.
The output shaft is optional: A: single end out of the shaft B: both ends of the shaft
rotation rate-- -- torque characteristic curve
Constant current driver
supply voltage : DC80V
torque (N.m)
Pulse frequency (KHZ)
speed(r/min)
Notice:
1 Please do not connect the wrong phase when the motor is connected to the drive.
2 Due to the different driving conditions, the motor may shows obvious heat, the surface temperature of motor is not allowed to exceed 85 degrees Celsius in the process of running.
3 when the motor is installs, the front cover of the motor must be installed to locate the position of the stop, and pay attention to the tolerance fit. Accuracy of the concentric the motor shaft and the loads.
Payment
if you have any problems of payment please contact us!
if you need to buy more goods but the price isnotvery cheap please contact us!
Warranty
All products have been checked and packaged in good condition before dispatch.
ALL peoducts have 1yeas warranty.
If you are not satisfied with our product and service.Please contact us first before giving a non positive feedback or dispute.we will try to our best solve the problems
