| Holding Torque: | 0.4N.m |
|---|---|
| Brand Name: | ROBOTDIGG |
| Type: | Hybrid |
| Phase: | 2 |
| Current / Phase: | 1.2A |
| Certification: | CCC |
| Step Angle(degrees): | 1.8 Degree |
| Model Number: | 17HS3001-300N84 |
| Unit Type: | piece |
| Package Size: | 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in) |
| Package Weight: | 0.5kg (1.10lb.) |
Quick Details
Specifications
Tr8*4 self-locking leadscrew linear stepper
Order No. 17HS3001-300N84
Stepper Motor:
Nema17 42*42*40m
Holding torque: 0.4 N.m Min.
200 steps per revolution (1.8 deg/step)
2 Phase, Bipolar, 4 wires
Rated Voltage 2V DC
Rated Current 1.2A
Phase Resistance: 1.7 Ohm ± 10% (20º C)
Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms)
Lead screw
Acme Lead Screw: 300mm long, Tr8x4(P2) out of the stepper motor
Nut: POM Nut
If the load on z-axis is Not that much, Tr8*4 leadscrew w/ pom nut can hold the position if sudden power off. This helps to avoid strike.
