L298N stepper motor controller board module

Driver chip: L298N dual H bridge DC motor driver chip Controlled part of peak current: 2A; Logical part of operating current range: 0 to 36 mA Stepper Motor Driver: ENA and ENB boards are high, referring to TTL level level. ENA of A1 and A2 can make a bone at the ENB terminal and can end with IB2. BJ public access step motor end Driver chip: L298N dual H bridge DC motor driver chip
Controlled part of peak current: 2A; Logical part of operating current range: 0 to 36 mA
Stepper Motor Driver: ENA and ENB boards are high, referring to TTL level level.
ENA of A1 and A2 can make a bone at the ENB terminal and can end with IB2. BJ public access step motor end
Color:As shown in the photo
Control signal input voltage range: Low level: -0, 3 V - 1, 5 V, high: 2.3 V - Vss.
Release signal input voltage range: low level: -0.3 - 1.5 V (control signal is invalid), high:2.3 V - Vss (control signal).
Maximum power consumption: 20 W (temperature T = 75 Celsius .).
Storage temperature: -25 to + 130 degrees Celsius.
Driver board size:48 mm 43 mm 33 mm (fixed copper column and heat exchanger height)
Extension:Take control direction indicator, logic part of the disk, power interface.
Package Contents:1 x L298N Controller Board Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.