| Holding Torque: | 10NM |
|---|---|
| Type: | Hybrid |
| Phase: | 2 |
| Current / Phase: | 7A |
| Certification: | CCC,CE |
| Step Angle(degrees): | 1.8 |
| Model Number: | 100HS9850A4-G20+MA860H |
| Applications: | CNC machining |
| Unit Type: | piece |
| Package Size: | 30cm x 20cm x 20cm (11.81in x 7.87in x 7.87in) |
| Package Weight: | 8.0kg (17.64lb.) |
Quick Details
Specifications
Appliaction:
Inject printers, Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, engraving machine, packaging machinery, CNC numerically-controlled machine tool and transmission.
Motor Product Description:
Step Angle Accuracy: ±5%(full step, no load)
Resistance Accuracy: ±10%
Inductance Accuracy: ±20%
Temperature Rise: 80 Degrees Celsius Max.(rated current,2 phase on)
Ambient Temperature: -20°C-+50°C
Insulation Resistance: 100MΩ Min.500V DC
Dielectric Strength: 500V AC for one minute
Gear Reduction Motor Specifications
| Model |
100HS9850A4-G12.5 |
100HS9850A4-G20 |
| Step Angle |
1.8 |
1.8 |
| Rated Current |
5A |
5A |
| Rated voltage |
3.25V |
3.25V |
| Resistance |
0.65ohm |
0.65ohm |
| Holding Torque |
10NM |
10NM |
| Inductance |
5mh/phase |
5mh/phase |
| Detent torque |
24.5N.cm |
24.5N.cm |
| Rotor inertia |
2500 g.cm*2 |
2500 g.cm*2 |
| Motor length |
98mm |
98mm |
| Lead wire |
4 NO |
4NO |
| Reduction box |
104*104*72mm |
104*104*72mm |
| Gear Ratio |
1:12.5 |
1:20 |
| Output shaft diamete |
15mm |
15mm |
| Matching Drive |
AC18-80V & DC24-110V 7.8A Drive |
|
Stepper Drive Specifications
| Item |
Min |
Typical |
Max |
Unit |
| Power supply |
24 |
- |
110 |
VDC |
| 18 |
|
80 |
VAC |
|
| Average output current |
2 |
2.5 |
7.8 |
A |
| Logic input current |
6 |
15 |
30 |
mA |
| Impulse response frequency |
- |
- |
100 |
KHZ |
| Pulse low level |
5 |
- |
1 |
μS |
Drive Wiring Description
| Signal |
Function |
| PUL |
Pulse signal: rising edge, the pulse from low to high is to go a step angle motor |
| DIR |
Direction signal: TTL-level driver to change the direction |
| OPTO |
Optocoupler drive power |
| ENA |
Enable signal: block or allow the drive to work, low-level ban |
| GND |
DC power supply ground |
| +V |
DC power supply positive (typical 24VDC) |
| A+ |
Motor Phase A |
| A- |
Motor Phase A |
| B+ |
Motor Phase B |
| B- |
Motor Phase B |
