NEW  Leadshine 2-Phase Hybrid Servo Drive HBS86H+86HS40-EC-1000 4 N.m Stepper Motor 

Description(HBS86H):

Manual  

https://drive.google.com/file/d/0B2sTR4hnbhvUYVQ3UWh5ZEhCc0k/view?usp=sharing

Software download

https://drive.google.com/file/d/0B2sTR4hnbhvUdmpfUXlBQ1Ftamc/view?usp=sharing

 

 

The HBS series offers an alternative for  applications requiring high performance and high reliability when the servo was  the only choice, while it remains cost-effective.

  The system includes a 2-phase stepper motor  combined with a fully digital, high performance drive and an internal encoder  which is used to close the position, velocity and current loops in real time,  just like servo systems. It combines the best of servo and stepper motor  technologies, and delivers unique capabilities and enhancements over both, while  at a fraction of the cost of a servo system.

Its great feature of fast  response and no hunting make it ideal for applications such as bonding and  vision systems in which rapid motions with a short distance are required and  hunting would be a problem. And it is ideal for applications where the equipment  uses a belt-drive mechanism or otherwise has low rigidity and you don't want it  to vibrate when stopping.

Feature:

•   HBS86H 2-phase Hybrid Servo Drive

•   20-70VAC or 30-90VDC, 8.2A Peak

•   No Tuning, Nulls loss of Synchronization

•   Closed-loop, eliminates loss of synchronization

•   Broader operating range – higher torque and higher speed

•   Reduced motor heating and more efficient

•   Smooth motion and super-low motor noise

•   Do not need a high torque margin

•   No Tuning and always stable

•   Fast response, no delay and almost no settle time 

•   High torque at starting and low speed, high stiffness at  standstill

•   Lower cost

   Electrical Specifications:

Parameter	Min	Typical	Max	Unit
Input  Voltage	20(30)	36(48)	70(100)	VAC(VDC)
Output Current	0	-	8.0(Peak)	A
Pulse  Input Frequency	0	-	200	kHz
Logic  Signal Current	7	10	16	mA
Isolation Resistance	500	-	-	MΩ

   Operating Environment:

Cooling	Natural Cooling or Forced cooling
Operating Environment	Environment	Avoid  dust, oil fog and corrosive gases
	Storage Temperature	-200C-  650C (-40F- 149 ) 0F
	Ambient Temperature	00C  - 500C (320F- 1220F)
	Humidity	40%RH-90%RH
	Operating Temperature (Heat Sink)	700C  (1580F) Max
Storage Temperature	-200C-  650C (-40F -149 ) 0F
Weight	580g  (9.88oz)

    Description(86HS40-EC-1000):

Manual  

https://drive.google.com/file/d/0B2sTR4hnbhvUR2JwYVFqYWVBb2c/view?usp=sharing

 

 

Leadshine 86HS40-EC-1000 is a 2-phase NEMA 34 stepper motor with 4,000 CPR  (1,000-line) incremental encoder (A , A-, B , B- signals). It is built with high  quality material and can move smoothly with very low noise and heating.

When driven by Leadshineeasy servo drives (closed loop stepper drives), the  position loop between 86HS40-EC and the drive is closed. You will never get  stall or loss of steps, often seen in open loop stepper systems. Because there  is no torque resolution needed like in open loop stepper systems, you can much  better high-speed performance than open loop stepper systems by increasing up to  30%.

Leadshine 86HS40-EC can also driven by regular open loop 2-phase stepper drives  and feedback encoder signals to motion controllers, or external devices.

    Features:

• 2-Phase NEMA 34 frame size

• 566 oz-in (4.0 Nm) holding torque

• Speed range: 0-3,000 RPM

• Integrated 1,000-line (4,000 CPR) Incremental Encoder with A  , A-, B , and B- signals

• 0.552 inch (14 mm) shaft size

• Quiet movement and low motor heating

    Specifications:

Model:	86HS40-EC
Frame  Size:	NEMA 34
Phase:	2
Step  Angle:	1.8°
Number of  Leads:	4
Holding  Torque:	566.0  Oz-In
Encoder  Resolution:	4,000 CPR
Shaft  Size:	0.552  inch
Phase  Current:	5.5 A
Inductance:	4.0 mH
Resistance:	0.46 Ohm
Rotor  Inertia:	0.0212  oz-in-sec2
Length:	3.82  inches
Weight:	3.30 lbs

 

 

Package:

1 x HBS86H Hybird servo  Drive
1 x 86HS40-EC-1000 stepper motor
1 x 3m Encoder Extension Cord